AJK430 Posted January 4, 2018 Report Share Posted January 4, 2018 Was friends with some of you guys before this forum blew up got locked out of my account probably due to inactivity or just lost the username and password. I'm Austin, out of Oshkosh, WI. I've got a bunch of BMW stuff going on to where I thought it would be senseless to not share and engage with the community and ask and answer questions. I'm a pilot by trade have been working on airplanes and cars for some time. I've got my fair share of projects going on for work, however, playing with cars is primary past time. I'm always collecting tools, buying and selling and trading parts etc... As of now, I'm working on two e30's and an e36 m3. This is my '86 325e. M20B27 is on the way out and she'll be getting the S52B32 out of the 99 M3, along with 5 lug conversion and plenty of other cool bits while I'm at it... Also working on this... will need help finding someone with the bits and technique to do the bodywork, if even repairable otherwise will part out... 1991 325ix in otherwise perfect shape if it hadn't been for this dudes daughter rear-ending a semi. Fortunately, all of the damage to the front is above the main frame rails and the title is clean... For now, id like some advice as to whether or not you think the ix is salvageable, some contacts to quote the bodywork (id prefer someone with e30 experience to have it completed properly) Ill start independent threads when I really get going on both of them... In the meantime, I'm always selling and trading parts and ill have a bunch of e30 stuff including some m20's complete and or parted, as well as a bunch of e36 m3 stuff since I bought the whole car to do the swap and will sell odd bits off her. B C 1 Quote Link to comment Share on other sites More sharing options...
YoungCR Posted January 4, 2018 Report Share Posted January 4, 2018 Welcome back! Sorry you got locked out, I could try to help you find your old account but I did a purge a few years ago. Look forward to seeing project posts. Quote Link to comment Share on other sites More sharing options...
m42b32 Posted January 4, 2018 Report Share Posted January 4, 2018 31 minutes ago, AJK430 said: As of now, I'm working on two e30's and an e36 m3. Me too!! Welcome! To me, assuming the frame is straight, that looks very fixable, especially if the frame-rails are untouched. Even if the frame is tweaked, it wouldn't be too hard to have it straightened. I have some E30 front end repair experience... this was my car after I smacked a deer 2.5 years ago: Check my build thread for my repair process. I'm far from a professional, but with fairly limited tools and resources I was able to do a pretty decent job of repairing the car on my own. Repairs more or less start here: I would HIGHLY recommend buying a new genuine BMW core support. They're pricey (just under $400) but very worth it as it dictates the alignment of nearly all the front end panels. Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 4, 2018 Author Report Share Posted January 4, 2018 19 minutes ago, m42b32 said: Me too!! Welcome! I would HIGHLY recommend buying a new genuine BMW core support. They're pricey (just under $400) but very worth it as it dictates the alignment of nearly all the front end panels. Thanks! Mine appears to be just a bit worse off but very well comparable. Another guy reached out to me and his was much worse and he is putting it back on the road. This is the solid type of advice I'm looking for. I agree with this and will plan to do that. So far I've collected OEM front fenders, and a hood all off the same car but they're champagne colored. Plan to repaint the thing regardless however. As well as an Mtech Lower but I may end up using that on my 86. Quote Link to comment Share on other sites More sharing options...
B C Posted January 4, 2018 Report Share Posted January 4, 2018 Love the picture of the M3 and the plane!This must be the year of the 24V swap. I am just finishing up the last few items on mine before it is ready to drive (M52 w/ S52 cams)Looking forward to the updates [emoji1531] Quote Link to comment Share on other sites More sharing options...
Rekpoint Posted January 4, 2018 Report Share Posted January 4, 2018 Welcome Back! Excited to see your builds! Quote Link to comment Share on other sites More sharing options...
wasnt m3 Posted January 5, 2018 Report Share Posted January 5, 2018 Welcome back! I may be interested in e36 stuff when the time comes, especially if you want to sell the rest of the car as a whole. Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 5, 2018 Author Report Share Posted January 5, 2018 3 hours ago, wasnt m3 said: Welcome back! I may be interested in e36 stuff when the time comes, especially if you want to sell the rest of the car as a whole. Thanks, I'll probably have a pretty well stripped down shell for sale, we'll see. Quote Link to comment Share on other sites More sharing options...
stealthbimmer Posted January 5, 2018 Report Share Posted January 5, 2018 Welcome back So how much did you pay for the ix if you dont mind telling. The guy was originally asking a crackhead price. I would be interested in some parts from that M when you part er out. Quote Link to comment Share on other sites More sharing options...
Jdesign Posted January 5, 2018 Report Share Posted January 5, 2018 Welcome Back!! Looks like you have a few things we enjoy here! Quote Link to comment Share on other sites More sharing options...
damnboy037 Posted January 5, 2018 Report Share Posted January 5, 2018 Welcome, I may be interested in some parts from your m3 Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 5, 2018 Author Report Share Posted January 5, 2018 1 hour ago, stealthbimmer said: So how much did you pay for the ix if you dont mind telling . The guy was originally asking a crackhead price. 3 I was the guy with the crackhead price.... because a guy offered me $3500, paid me on paypal then asked for his money back. Im not an asshole so I gave him his money back posted it back up for $3500 since a few people told me its worth at least that in parts as well as the parts I had already collected to repair it... Then a few more folks told me its repairable so I think ill keep it. I bought the car in Seattle and had it shipped here. Most IX's that aren't rotted out are in Denver or Seattle. Ill hold no offense to your comment, I just went with where the market brought me. You should take a look and see what clean IX's are pulling if you can find one. I've seen rusty ones with better than 200,000 on the clock asking 10-12k. Yes there are runner/drivers out there with rust and a bunch of miles for 2-5k. https://www.dropbox.com/sc/xzek0necpi12mnl/AAB_pQEHsSr6UUpZiHk_XnQEa To all of those expressing interest in e36 m3 parts, ill have more pics when I bust her out of storage again. Cheers! B C 1 Quote Link to comment Share on other sites More sharing options...
patsbimmer1 Posted January 5, 2018 Report Share Posted January 5, 2018 This is awkward... it's not often that the crackhead actually hangs out with us. Welcome back! Rekpoint and B C 1 1 Quote Link to comment Share on other sites More sharing options...
AsparagusMike Posted January 5, 2018 Report Share Posted January 5, 2018 Welcome back! You won't remember me by username but I am the guy who bought that tranny off you from your 86 way back when. What happened to the original plans to do an LS swap? Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted January 5, 2018 Report Share Posted January 5, 2018 Welcome! Do you do any mountain riding? Your commuter / Gravel X bike requires me to inquire. Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 5, 2018 Author Report Share Posted January 5, 2018 10 minutes ago, AsparagusMike said: Welcome back! You won't remember me by username but I am the guy who bought that tranny off you from your 86 way back when. What happened to the original plans to do an LS swap? Yeah I recall! You get that in? Im still looking for those poly bushings you had if you still had them. Negative on the LS, while it might have been way cheaper im still a huge OEM/Straight 6 fan and couldn't find the courage to alter the car in that fashion. I still have to get that car out of that POS garage and down to my hangar... that should be fun. 7 minutes ago, GunMetalGrey said: Welcome! Do you do any mountain riding? Your commuter / Gravel X bike requires me to inquire. GunMetalGrey, I think you bought that 89is from me a bunch of years ago. We traded some parts and wheels or something also I don't totally recall. Yeah, its an older Specialized Tri-Cross set up for mountain/gravel right now. It works well on hard packed mud/gravel, just have to work a bit harder on the asphalt... its a trade-off. It might be for sale too. It's a 56CM frame, I'm looking for an all road bike now that I've moved back here from out west. Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted January 5, 2018 Report Share Posted January 5, 2018 22 minutes ago, AJK430 said: GunMetalGrey, I think you bought that 89is from me a bunch of years ago. We traded some parts and wheels or something also I don't totally recall. Yeah, its an older Specialized Tri-Cross set up for mountain/gravel right now. It works well on hard packed mud/gravel, just have to work a bit harder on the asphalt... its a trade-off. It might be for sale too. It's a 56CM frame, I'm looking for an all road bike now that I've moved back here from out west. Hot damn man, it's been awhile! I actually just sold that car at the end of summer, it was quite a bit different from when I bought it from you! Nooo! You can't convert back to a roadie! Just have to travel a bit for the hills! Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 5, 2018 Author Report Share Posted January 5, 2018 1 minute ago, GunMetalGrey said: Hot damn man, it's been awhile! I actually just sold that car at the end of summer, it was quite a bit different from when I bought it from you! Nooo! You can't convert back to a roadie! Just have to travel a bit for the hills! Right, yeah I haven't done too much with cars besides get that 86 to where its at and maintain my Audi. The 86 I bought in 2014 from a guy that brought it up with him when he moved from Texas and it was a grandma car with blown struts, faded paint and a shot interior but rust free and straight otherwise. Quote Link to comment Share on other sites More sharing options...
basedspider Posted January 5, 2018 Report Share Posted January 5, 2018 Welcome! S52 E30 should be a fun swap, plenty of help on here too. Quote Link to comment Share on other sites More sharing options...
AsparagusMike Posted January 6, 2018 Report Share Posted January 6, 2018 13 hours ago, AJK430 said: Yeah I recall! You get that in? Im still looking for those poly bushings you had if you still had them. Negative on the LS, while it might have been way cheaper im still a huge OEM/Straight 6 fan and couldn't find the courage to alter the car in that fashion. I still have to get that car out of that POS garage and down to my hangar... that should be fun. Not in yet, working on fixing and refreshing a few things on the car before the motor goes in. Still got the bushings, shoot me a message and we can discuss bidness. Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 6, 2018 Author Report Share Posted January 6, 2018 54 minutes ago, AsparagusMike said: Not in yet, working on fixing and refreshing a few things on the car before the motor goes in. Still got the bushings, shoot me a message and we can discuss bidness. You got it, thanks Quote Link to comment Share on other sites More sharing options...
i_love_cars Posted January 7, 2018 Report Share Posted January 7, 2018 In for S52 swap progress posts. Do you have a timeline for that? Would be an awesome addition to see at the E30 picnic in May Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 7, 2018 Author Report Share Posted January 7, 2018 59 minutes ago, i_love_cars said: In for S52 swap progress posts. Do you have a timeline for that? Would be an awesome addition to see at the E30 picnic in May No idea. As always the delicate balance of time and money. I can try to bust ass to make it happen... it’s not unrealistic, just keep pushing me along! Hahaha Quote Link to comment Share on other sites More sharing options...
AJK430 Posted January 23, 2018 Author Report Share Posted January 23, 2018 Hey for all of those that asked... I’ve got a e36 m3 part out thread going in Parts for Sale section! Quote Link to comment Share on other sites More sharing options...
AJK430 Posted October 9, 2018 Author Report Share Posted October 9, 2018 Rekpoint and AsparagusMike 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.