Jdesign Posted April 4, 2018 Report Share Posted April 4, 2018 Thats a good question, I am now wondering the same thing! Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 4, 2018 Author Report Share Posted April 4, 2018 Tis a vacuum pump! Since a diesel engine doesn't create any vacuum in the intake, there needs to be a source for brakes. Many diesels use hydroboost (power steering pump) for brakes, as do e28's, even the gassers. Some run a vacuum pump on a belt, but this one has one that runs on a cam lobe on the main cam. Nifty stuff. Jdesign and B C 2 Quote Link to comment Share on other sites More sharing options...
B C Posted April 4, 2018 Report Share Posted April 4, 2018 Learning is fun SteelBlue 1 Quote Link to comment Share on other sites More sharing options...
HipMF Posted April 5, 2018 Report Share Posted April 5, 2018 6 hours ago, GunMetalGrey said: as do e28's, even the gassers. Googling e28 gasser did not give the results I was hoping for. I might have to do something about that... that would confuse the hell out of people. m42b32 1 Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 9, 2018 Author Report Share Posted April 9, 2018 @AsparagusMike showed up Friday and watched me try to get air out of my fuel system for about 5 hours, I'm sure it was amusing seeing it still not start. I went back Saturday and loosened the fuel outlet on the back of the pump for one injector and suddenly is was moving fuel (after raising the fuel cell above the pump). @HipMF sat and watched in amusement as I tried to get all the air out, while sucking in air bubbles and such, then tried to start it with no avail. I had vast amounts of homework to do so it had to be left for later. It turns out that it blows perfect smoke rings out of the exhaust most of the time so that was cool. Hopefully will have it running some night this week. Jdesign, straight6pwr, P_Roloff and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Jdesign Posted April 9, 2018 Report Share Posted April 9, 2018 Post pics of smoke rings I wanna see!!!! Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 11, 2018 Author Report Share Posted April 11, 2018 I see my member title has changed. I approve of this change, and shall continue to ensure the most bro content possible. I do have something planned that will greatly increase my bro level. HipMF, Jdesign and P_Roloff 2 1 Quote Link to comment Share on other sites More sharing options...
patsbimmer1 Posted April 11, 2018 Report Share Posted April 11, 2018 Quote Link to comment Share on other sites More sharing options...
B C Posted April 11, 2018 Report Share Posted April 11, 2018 Is that the movie where Mater gets it up in the middle of the night? GunMetalGrey 1 Quote Link to comment Share on other sites More sharing options...
patsbimmer1 Posted April 11, 2018 Report Share Posted April 11, 2018 5 minutes ago, snap said: Is that the movie where Mater gets it up in the middle of the night? Yea and then Sally let's Lightning come in her Cone. Jdesign, GunMetalGrey and B C 1 2 Quote Link to comment Share on other sites More sharing options...
straight6pwr Posted April 11, 2018 Report Share Posted April 11, 2018 9 hours ago, GunMetalGrey said: I see my member title has changed. I approve of this change, and shall continue to ensure the most bro content possible. I do have something planned that will greatly increase my bro level. just watch out for donald glover and dave matthews CDs. B C 1 Quote Link to comment Share on other sites More sharing options...
SteelBlue Posted April 11, 2018 Report Share Posted April 11, 2018 12 hours ago, GunMetalGrey said: I see my member title has changed. I approve of this change, and shall continue to ensure the most bro content possible. I do have something planned that will greatly increase my bro level. Whips? CB? 4 inch tips? Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 11, 2018 Author Report Share Posted April 11, 2018 1 hour ago, SteelBlue said: Whip? There is also one of those laying around for it if the bro level is not over 9000. Jdesign 1 Quote Link to comment Share on other sites More sharing options...
HipMF Posted April 12, 2018 Report Share Posted April 12, 2018 10 hours ago, straight6pwr said: just watch out for donald glover and dave matthews CDs. Is this Dave Matthews? Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 16, 2018 Author Report Share Posted April 16, 2018 So I was really hoping to post some sweet pictures of this thing out in the insane snow storm we got this weekend, but apparently that was too much to ask for. Got it running but something wasn't right, it would change revs on its own, there was a lot of air moving through the fuel system even though there was no air being pulled into the pump, and things in general were just being odd. at some point it was realized there was fuel dripping out of a banjo bolt that was open, as I believed it had been on the old one. I double checked for sanity and found that the old one indeed never had that port plugged or plumbed, as I thought it was a vent port. Well it is, and it should never have diesel seeping out there. Here is a nifty cutaway to show you what port. (10) That area shouldn't really have much fuel in it to begin with, and it certainly shouldn't have fuel on the underside of the boost compensation diaphragm. Pump is coming out and going to the diesel shop that did my injectors, along with the parts pile that is my old pump. I hope to sweet baby jesus that they can make the "new" one work with either purchased parts or ideally parts from my old pump. Can this just work please? Quote Link to comment Share on other sites More sharing options...
Jdesign Posted April 16, 2018 Report Share Posted April 16, 2018 What a headache. One more piece to this jigsaw of a fuel system..... Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 16, 2018 Author Report Share Posted April 16, 2018 Oh, I also still had coolant leaking from the floor/frame rail. If it's the heater valve I may just roll the car outside and throw a match in it. Jdesign 1 Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 19, 2018 Author Report Share Posted April 19, 2018 Dropped the fuel pump off at the diesel shop today. I told him what was going on and he immediately had an assumption of what was wrong, and figured it was just an o -ring inside the pump. So that's cool to hear. I asked him to do what he needed to do to make it work, and test it, so that when I put it in the car I know it will work. Jdesign 1 Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 26, 2018 Author Report Share Posted April 26, 2018 I should have known this would happen, but guys, for real. Avoid diesel BMW stuff at any cost. Repairing and testing the pump cost more than the pump itself. I have an $1,100 fuel pump, and it doesn't even look that cool. Jdesign, suspenceful and B C 1 2 Quote Link to comment Share on other sites More sharing options...
B C Posted April 26, 2018 Report Share Posted April 26, 2018 Time will heal all wounds Quote Link to comment Share on other sites More sharing options...
straight6pwr Posted April 26, 2018 Report Share Posted April 26, 2018 You can replace the heater valve with a bit of hose and a brass valve for cheap, or, disassemble the leaking one, remove the actuator, and cap it with a block off plate which will leave it always open. Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 26, 2018 Author Report Share Posted April 26, 2018 See also: Things Ben doesn't know how to do.Things Ben doesn't know how to do: Cut his losses. Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted April 26, 2018 Author Report Share Posted April 26, 2018 13 minutes ago, straight6pwr said: You can replace the heater valve with a bit of hose and a brass valve for cheap, or, disassemble the leaking one, remove the actuator, and cap it with a block off plate which will leave it always open. I like the brass valve idea lol. Valve open in winter, valve closed in summer. Quote Link to comment Share on other sites More sharing options...
straight6pwr Posted April 26, 2018 Report Share Posted April 26, 2018 3 hours ago, GunMetalGrey said: I like the brass valve idea lol. Valve open in winter, valve closed in summer. mostly yes, but, dont forget the windshield can fog to hell on a summer day in the rain. without the heat, its hard to get rid of that condensation. i did a couple of autox runs in the rain with my windows wide open so the windshield would stay clear when i bypassed my heater valve last year. Quote Link to comment Share on other sites More sharing options...
Jdesign Posted April 30, 2018 Report Share Posted April 30, 2018 Did you get the pump in this yet? I was driving near Oshkosh this past weekend and saw a massive plume of black smoke in the skies overhead figured it might be you ripping around... Daggerty and HipMF 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.