-
Posts
136 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by SamHolzmann
-
-
-
Finally a build update:
I cut the front of my car off, built a tube front, and then everything decided to snowball.
With the tube front done, I decided to do some wheel tubes to keep water/dirt out. I've always wanted to experiment with composites and saw this as an opportunity.
After modeling the entire tube front, I created the wheel tub in solidworks, 3d printed the molds, and created carbon fiber wheel tubs/liners. Also, a special resin was used and the passenger side tube was post heated allowing to withstands 500+ deg temperatures.
The tube front moved the position of the oil cooler, therefore a new ducting system had to be designed.
Made up some bumper brackets to adapt the factory crash bar.
Once everything critical was mocked up the bay was painted, finally assembly has started and is beginning to start to look like a car again. I still have to finish painting a few of the brackets and reclear all of the carbon pieces. I know I have missed a lot of small details, hopefully they make it here sooner than later.
- jc43089, SteelBlue, suspenceful and 5 others
- 8
-
I found a couple of these while moving this weekend. Would consider trading one for some powder coat work?
Text me (im really bad about messaging on here) if you still need one and are interested: 920 948 0040
-
Just seeing this now but i believe I have one laying around at the shop. Can look later when I get there if you are still looking for one.
-
Ahhhh the good ole build thread. Been a very tame winter
I wasnt planning to rewrap the whole car but after a few panels we noticed my car has seemed to turn and orange color. So a whole re wrap began.
Not sure exactly why is changed, but i imagine the level of heat the rear tires gave off, the dirt build up after drift days, and the fact the I never took that great care of the outside are definitely factors.
Next, after burning up a ton of coil packing wires last year, @Tkuhn rerouted a couple things and make everything quick disconnect so if they burn up I can just plug a new set in instead of rewiring. Currently designing some clips to hold the connectors down.
Still fighting cooling issues, i finally decided to install an oil cooler with the s54 oil filter housing @DrLeadFoot sold me like a year ago. Putting the cooler in the brake duct/fog should provide the freshest air possible.
Getting into 3D printing awhile back I designed and printed some custom ducting to get all the air flow possible. Pictures are of the V1.2 duct, V1.3 (last ducting picture) has been printed with small changes to make fit up to valance perfect. I have some plans for 3D printed radiator ducting, but those plans are on the back burner till the car is up and running.
Lastly, the whole kit on the car got fixed and freshened up along with ditching the IS side skirts I had on the car for something that a little lower. 99% of the car will be white this year rather than the white with black lower ascents.
-
-
If it means anything about a year ago I attempted to clear shop space and posted my black comfort seats on a couple fb groups for $50. They still are in my possession.
-
Looking for an uncut M/S52 Engine Harness.
-
I have m axles and trailing arms. Shoot me a fb message if you still need some
-
It also makes more low end torque than max whp.... Starting standstill burnouts in 3rd gear has been a reoccurring thing throughout the year.
-
-
Been a hot minute, but still have the car. Just never made an update.
Car is tuned and is a rocket ship. Because of the manifold design, the waste gate had to moved to turbo housing.
Before waste gate modifications, we saw boost levels of 26+ psi while the car was at the dyno. While the number it produced was impressive, it would have broken everything
With waste gate modifications we have 100% control and car is making 450 whp at 10-11 psi on pump gas.
One more event this year then who knows what will happen next...... 😎
-
- B C, Jdesign, suspenceful and 1 other
- 4
-
- B C and KaiserRolls
- 2
-
-
Unless this picture is very misleading i believe i am in luck, but time will tell
-
Im going to putz with it this weekend, Ill keep this updated after my findings
-
Im assuming VSS is standing for vehicle speed sensor? I just know the one in my car has something plugged into it and figured i need it for something. PS. This is for a normal car not the racecar
-
So in my adventure to find a new cluster to replace the one in my e30 i went and got one today. As i look at it now i notice that it is missing the green plug assembly on the back. Am i able to remove it from my old cluster and put it the one i just picked up?
-
2 hours ago, KaiserRolls said:
Whoa whoa whoa, what's the new motor setup?
Secret Stuff my man secret stuff
-
- B C, Boris3, KaiserRolls and 2 others
- 5
-
I'm sure the shop did this but make you look over all of the valve retainers super good. From everything I have read s50's built prior to 10/95 have retainer problems. The only reason I know this is because when I blew my motor up there were a couple ready to give out and let the valve drop.
-
Maybe ill have to come to an auto x event sometime this year, on the downside to that is the car is built to do the exact opposite of auto x and i would probably end up getting kicked out.
-
Just seeing all the updates now, sweet to see another boosted s50 especially in another e30. We'll have to run supercharged s50 against turbo s50.
Cylinder Heat Block Off Plates
in Parts For Sale
Posted
I've been making these cylinder head block off plates for awhile now and thought I would also offer them on WIBimmers for anyone who hasnt seen them. Stop shoving rags into intake/exhaust ports when removing intake/exhaust manifolds.
Right now offering them for M20, M50/52/54 S50/52, and S54. I also can make them for other engines for anyone interested.