-
Posts
583 -
Joined
-
Last visited
-
Days Won
6
Reputation Activity
-
RamRod E28 got a reaction from mkoepp in E28 SETA Build
So what does one do the night before scooters with a rusty as hell rear valance with the daylight dwindling??? YES!!! lets fix that valance and get her looking sharp!?!? Let's do some body work they said, it'll be fun they said...
not a great before shot but you can see what I had to deal with...
finally getting somewhere after fabbing patches and grinding for like 2 hours with the new Bosch grinder! Mi padre and some classy beer were helping
Finally ready for some spray bombing!
no more bumper mount holes!
Then just to get her done for now some plastidip (it was almost 4am when I left the shop! Thanks again Dad!)
Also if you have manual seats you have a cupholder!
-
RamRod E28 got a reaction from jc43089 in E46 mods and ideas...
Ill bring both bfinley in the e46 and me in the e28 and smoke out his entire neiborhood!!! Why is everyone hating on black??? Black is the only black and why hate on the tails most seem to like em... Earl is just jealous because I did a full swap on my e28 in the time it took him to do his rear brakes and bearings...
-
RamRod E28 reacted to B C in E46 mods and ideas...
Spend the money on a GoPro, do burnouts in Earl's front yard, post it on youtube.
or
I say strut brace, good summer tires, HIDs, and any maintenance items it may be in need of (bushing refresh)
-
RamRod E28 got a reaction from bfinley in Savin Big Money Project Thread
we can put a fan boat engine on the back of it really quickly... I'm sure the neighbors won't mind. I can let you drive my e46 to help ease the pain a little bit as well
-
RamRod E28 got a reaction from mkoepp in Cosmos Resurrection
Get a g260 behind that seta and a JM performance exhaust and you won't regret it!!!
-
RamRod E28 got a reaction from patsbimmer1 in Official-look-what-i-found-thread (craigslist, other-forums, etc)
BMW e36 touring dizzle!!! I want so damn bad
http://www.gumtree.com/p/cars-vans-motorbikes/bmw-325tds-se-e36-tourer-diesel-black-leather-interior-lady-owner-very-reliable/1064199368#photo-content
-
RamRod E28 got a reaction from andyhundley in E28 SETA Build
I worked on a mustang today... It was awful Ford is garbage
-
RamRod E28 got a reaction from jc43089 in E28 SETA Build
I worked on a mustang today... It was awful Ford is garbage
-
RamRod E28 got a reaction from YoungCR in E28 SETA Build
I worked on a mustang today... It was awful Ford is garbage
-
RamRod E28 got a reaction from jc43089 in chit chat thread
I love how these guys are so pumped the whole time... Yet I can't understand a word they are saying
-
RamRod E28 got a reaction from B C in 1978 e21 m20 turbo swap, AKA What did I get myself into
No need to look one will find you... Trust me, I know from experience
https://www.youtube.com/watch?v=p8-rGAM_KeA
-
RamRod E28 got a reaction from B C in 1978 e21 m20 turbo swap, AKA What did I get myself into
car-part.com is a magical website!!!
-
RamRod E28 got a reaction from jockhater2 in E28 SETA Build
I'm perfectly happy with the wheels on the e46 I just plastidipped them gunmetal grey and they look great for the time being and I just put new skins on them anyways. The main thing that needs wheels is my e28 I hate the bottlecaps on there.
-
RamRod E28 got a reaction from jockhater2 in Motion to find a time machine...
I personally like the m20 manifold just taking them off and putting them on is a bit of a chore but not nearly as bad as working on a Jeep 4.0... Both the intake and exhaust are on the same side of the damn head!!! I will go back in time with you to sack the man that thought that that was a good idea!
-
RamRod E28 got a reaction from DrLeadFoot in E28 SETA Build
Ok finally back on to do an update... Last time I left off on here was I got most all my parts for the Super ETA swap and manual swap.... Well here some pics and some info for whats been done.
Well I removed the oil pan and cleaned up all the nastiness and didn't get any pics of that just due to wanting to get it out of the way and wasn't all too entertaining just getting all the nasty hard gasket off and putting the new gasket on. But then I moved on to the timing belt and water pump. This was just one swipe from under the crank!
Timing belt and water pump are on! That was so easy to do on the m20 (Does anyone have an M20 Water pump pulley? need one ASAP!!!)
The blurry engine has taken flight!!!
Shits about to go in
Going in
Close... But no cigar
Finally after wiggling and jacking the trans up and down about a bajillion times I got the engine to set down on its mounts and bolted in the trans crossmember!!!
Here's what my old trans bushings looked like compared to the new ones
Starting to look like a car again!!!
Bye bye gangster lean
The harness is "in" lol
The condenser and the radiator are now bolted in place some of the hoses are set in place also the exhaust the driveshaft and the heatshield are in the car now
The shifter is in thanks to Mr Menard for his mad fabbing skills
Just need a few things and new fluids and its ready to roll and do some maaddd!!! burnouts
-
RamRod E28 got a reaction from mkoepp in E28 SETA Build
Ok finally back on to do an update... Last time I left off on here was I got most all my parts for the Super ETA swap and manual swap.... Well here some pics and some info for whats been done.
Well I removed the oil pan and cleaned up all the nastiness and didn't get any pics of that just due to wanting to get it out of the way and wasn't all too entertaining just getting all the nasty hard gasket off and putting the new gasket on. But then I moved on to the timing belt and water pump. This was just one swipe from under the crank!
Timing belt and water pump are on! That was so easy to do on the m20 (Does anyone have an M20 Water pump pulley? need one ASAP!!!)
The blurry engine has taken flight!!!
Shits about to go in
Going in
Close... But no cigar
Finally after wiggling and jacking the trans up and down about a bajillion times I got the engine to set down on its mounts and bolted in the trans crossmember!!!
Here's what my old trans bushings looked like compared to the new ones
Starting to look like a car again!!!
Bye bye gangster lean
The harness is "in" lol
The condenser and the radiator are now bolted in place some of the hoses are set in place also the exhaust the driveshaft and the heatshield are in the car now
The shifter is in thanks to Mr Menard for his mad fabbing skills
Just need a few things and new fluids and its ready to roll and do some maaddd!!! burnouts
-
RamRod E28 got a reaction from colorowley in E28 SETA Build
The more I drive around the more I notice how rare my e46 is u don't see any black on black sport package sedans with a stick
-
RamRod E28 got a reaction from colorowley in 1992 525it with an M30B35 Swap
I think we should put up a graveyard for all those who have gone astray from bmw
-
RamRod E28 got a reaction from colorowley in 1992 525it with an M30B35 Swap
This is to let all of you know Laishes bought.... a MIATA????
-
RamRod E28 got a reaction from colorowley in 1992 525it with an M30B35 Swap
Driven the e46 almost all winter and haven't been special enough to put it in the ditch
-
RamRod E28 got a reaction from B C in 1978 e21 m20 turbo swap, AKA What did I get myself into
Coulda sent me a text im always down for working on bmws and drinking beer as well lol also found this vid for a little inspiration.
-
RamRod E28 got a reaction from bfinley in E28 SETA Build
Finally my van is photoworthy thank you so much for telling me about these wheels Mr. Menard!!!!
-
RamRod E28 got a reaction from DrLeadFoot in Chapter GMW | E30 LS1 (starting on post #1427)
JL audio they make some glorious noise!!!!
-
-
RamRod E28 got a reaction from jc43089 in E28 SETA Build
alrighty so no big update just realized that there are no pics of the e46 so i snapped a few just for the hell of it.
and some forum swaggerness
just washed it yesterday and went to a bonfire last night and the thing got covered in ash gotta love a black car