RamRod E28 Posted June 4, 2014 Author Report Share Posted June 4, 2014 Someone copied me for plate mounting... Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 4, 2014 Author Report Share Posted June 4, 2014 Now for a roof rack... was thinking wheels but might as well rock my bottlecaps till they are bald Quote Link to comment Share on other sites More sharing options...
jc43089 Posted June 4, 2014 Report Share Posted June 4, 2014 I rocked my bottlecaps until the tires were junk, and then someone gave me some free tires so I ran those for another year before I got the contour reps. I would recommend lots of burnouts to dispose of them lol. After looking at that turbo, the hot side inlet might be a standard pattern, I have a shiny downpipe that might fit, let me dig around the basement a bit. patsbimmer1 1 Quote Link to comment Share on other sites More sharing options...
Rowleym Posted June 7, 2014 Report Share Posted June 7, 2014 Don't mess around with a subie turbo man, unless you are doing some cool compound setup. The larger of the two turbos in a compound setup should be sized for your total power level. This is an m20 no? Just stick with the hx35 thing. Works well can't go wrong and its cheap. Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 9, 2014 Author Report Share Posted June 9, 2014 So what does one do the night before scooters with a rusty as hell rear valance with the daylight dwindling??? YES!!! lets fix that valance and get her looking sharp!?!? Let's do some body work they said, it'll be fun they said... not a great before shot but you can see what I had to deal with... finally getting somewhere after fabbing patches and grinding for like 2 hours with the new Bosch grinder! Mi padre and some classy beer were helping Finally ready for some spray bombing! no more bumper mount holes! Then just to get her done for now some plastidip (it was almost 4am when I left the shop! Thanks again Dad!) Also if you have manual seats you have a cupholder! mkoepp 1 Quote Link to comment Share on other sites More sharing options...
bfinley Posted June 9, 2014 Report Share Posted June 9, 2014 After picture?! Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 9, 2014 Author Report Share Posted June 9, 2014 Quote Link to comment Share on other sites More sharing options...
bfinley Posted June 9, 2014 Report Share Posted June 9, 2014 I liked the rust... Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 9, 2014 Author Report Share Posted June 9, 2014 I liked the rust...you would haha Quote Link to comment Share on other sites More sharing options...
bfinley Posted June 9, 2014 Report Share Posted June 9, 2014 I liked the rust... Quote Link to comment Share on other sites More sharing options...
jc43089 Posted June 9, 2014 Report Share Posted June 9, 2014 Is that spray foam? Or what did you fill the hole with? It looks great BTW. Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 9, 2014 Author Report Share Posted June 9, 2014 metal behind the holes and body filler over it all sculpted to the body lines. (i need bigger twin tips now lol) Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 10, 2014 Author Report Share Posted June 10, 2014 Also met mkoepp when I was chilling with cyoung and after hanging out with the other e28 mike chris and I headed to lake michigan for a few e28 shots! Rocking bottlecraps! Represent! She's a dirty girl! Quote Link to comment Share on other sites More sharing options...
jc43089 Posted June 10, 2014 Report Share Posted June 10, 2014 Sweet pics! Quote Link to comment Share on other sites More sharing options...
Earl Posted June 10, 2014 Report Share Posted June 10, 2014 What are your plans for the front now? Quote Link to comment Share on other sites More sharing options...
B C Posted June 10, 2014 Report Share Posted June 10, 2014 I think smoked turn signal lenses would be a nice touch since they would be hidden a little better. Quote Link to comment Share on other sites More sharing options...
mkoepp Posted June 10, 2014 Report Share Posted June 10, 2014 Nice pictures and what Snap said ^^ Nice to meet and talk with you guys... Keep it up...nice work Quote Link to comment Share on other sites More sharing options...
YoungCR Posted June 11, 2014 Report Share Posted June 11, 2014 Also I got to drive it! Yes I geeked about driving a super eta as I miss mine. Mmmmm exhaust notes Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 11, 2014 Author Report Share Posted June 11, 2014 What are your plans for the front now?4 Hellas across the front! And in a seta exhaust note junkie now! Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted June 22, 2014 Author Report Share Posted June 22, 2014 Hmm....http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Product_Code=TRB-Kit-E30-GT35-DP&Category_Code=TRBBMW Quote Link to comment Share on other sites More sharing options...
B C Posted June 22, 2014 Report Share Posted June 22, 2014 Wasnt a fan of that manifold design when i was shopping manifolds. I dont like how the tubes point at eachother at the turbo flange Quote Link to comment Share on other sites More sharing options...
Rowleym Posted June 22, 2014 Report Share Posted June 22, 2014 I would highly suggest at least finding a different manifold. If you are looking for cheap(but also extremely effective) you should use the manifold adapter like snap. Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted July 30, 2014 Author Report Share Posted July 30, 2014 Im liking the e34 front valance on e28s from the m5 for the front! and also headed back home from colorado tomorrow afternoon after working out here for 2 plus weeks and no days off (even for my bday!) and missing my e28 and miata like crazy! Quote Link to comment Share on other sites More sharing options...
DrLeadFoot Posted July 30, 2014 Report Share Posted July 30, 2014 Making all the skrilla to spend in the bimmer!!! YoungCR 1 Quote Link to comment Share on other sites More sharing options...
RamRod E28 Posted July 30, 2014 Author Report Share Posted July 30, 2014 https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10527369_10152243126653862_10374992228068619_n.jpg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.