nick.e46.330i.
-
Posts
351 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by nick.e46.330i.
-
-
Anyone register for the October 21st event at usair?
-
Both front doors are sold. Still have the car. I think I’ll be pulling everything worth keeping and scraping everything else within the next couple weeks.
-
-
5 hours ago, patsbimmer1 said:
Makes sense. By track events i'm guessing drift events or do you have timed events planned?
I would like to do the fall Shawano auto-x event this year. Maybe next year do a few more events of that nature.
-
3 hours ago, patsbimmer1 said:
Why did you end up dropping the air?
I would like to do more track events and I felt the air wasn’t going to handle as well as my coilovers did previously.
-
I haven’t had much ambition with this thing in the last couple months. But I did do a couple things with it. In may I put the car back to coilovers. I went back to the Isc coilovers that were on my car before I went on air. Emailed Isc for replacement parts so I could adjust ride height in the front again as one on the fronts were seized from driving on them in winter years ago.
Over the 4th of July break I deleted the ccv and now running a radium engineering catch can. I have the car it’s first good wash since last year.
Also I ended up trading my Volk III wheels for a set of BBS MK Motorsport mk2 wheels. They are 18x8.5 et13 with 235/40 up front and 18x10 et20 with 265/35 in the rear. The tires rub pretty bad in the rear so my current plan is to order some 215/40 tires for the front and use the current front tires for the rear. Once I get the tires situation done I’ll mess with the camber a bit to make them actually fit decent.
Hopefully I can get the tires before ls brewhaus and get the car there!
-
On 4/7/2018 at 6:34 AM, wally509 said:
The first place I took it to shot me a price of $200 to weld that crack, just to weld it, no refinishing of the area afterward. I thought that price was SMOKING crack. That looks like a 1 hour job at most to me. I was thinking $75-$100, maybe only $50 if I did all the prep work. Taking it to a local welding guy to look at today.
If you haven’t already gotten it fixed, my buddy would weld it for the price range you’re thinking of(I think). And that would be to gouge it, weld it, and grind it smooth. He is located in Eden, WI if you would be interested.
-
After getting my car done and on the road at 1:30am Friday morning, my car ended up making it to euro district with no major problems. There were something that were half finished and not done that I wanted to be done so my car will be going back into the shop to get finished up!
Here are some pictures that I’ve found from the show that people have taken.
- jc43089, KaiserRolls, Jdesign and 1 other
-
4
-
-
Bump. Hood, rad support, headlights, and engine all sold
-
Little update.. Since the s54 ofh does not have tabs to mount the power steering reservoir my brother made one that we ended up mounting by the driver side motor mount arm.
We ended up converting the lines to -6an and instead of using the stock ps cooler I bought an auto trans heat sink and mounted that in front of the steering rack. After a couple trips to behling I everything I need to make my oil cooler lines, Vanos line, and power steering lines. We shaved the top of the core support so there was a decent mounting point for the oil cooler.
And I had my buddy that painted the engine bay paint the brake booster as well.
But it there’s quite a bit more to do to make the euro district deadline.
- jc43089, Jdesign, DrLeadFoot and 2 others
-
5
-
I’m putting my air suspension and management up for sale. I have Air Lift Performance front and rear kits, accuair switchspeed management, Zaetech digiguage, Air Lift 5 Gallon tank, and two viair 444c compressors. This is pretty much a drop in setup. All you would need to do for wiring is hook up the constant power, switched power, and ground and run the controller and gauge cables. I have it posted for $2500 on Facebook and other forums but wibimmer price $2200.
I would also sell just the bags if anyone would be interested in just those.
-
4 hours ago, P_Roloff said:
Bay looks great, looks clean enough to eat off of. Excited to see more progress!
Thanks!
1 hour ago, snap said:Is that engine position stock? Looks tucked back a bit.
Keep up the amazing work Nick!Yea. That’s the stock position. The rad support and radiator assembly just takes up a decent chunk of space.
I’ll try to! I just can’t wait to drive this thing.
-
-
Does anyone have any experience with nscexpert/inpa? I’m going to be getting the programs and want to do some coding on my e46. Any help/tips would be greatly appreciated!
-
I recently picked up a parts car that had a black interior. I’m parting the rest of the car out. Everything but the engine and interior are free game. Auto trans, post facelift sedan. Black exterior. Let me know what you need.
-
-
The engine is finally painted. It took longer than I wanted to but that’s because we ran out of propane and and when that happened I lost ambition. Haha. My buddy came out to my shop and put the primer down Saturday night. Then came out tonight to lay down base and clear.
Also since my last I got the spacers to space out my power steering pump.
I also put new seal on the vanos pistons and put the anti rattle kit in. I don’t have any pictures of the process as my phone died when I started.
Now when @Tkuhn has time he will be doing the wire tuck.
-
-
The last couple weekends have been somewhat productive.
The engine bay welding is complete and body filler is mostly done. Just got to sand a couple more spaces and lay down a little bit more filler.
I also picked up an s54 oil filter housing from @TehRaydarlover. I bolted it to the block to take measurements for the power steering pump spacers.
-
51 minutes ago, Jdesign said:
Same. It was a mess but it worked quickly. Im not looking forward to doing it again this winter.
It wasn’t that messy for me. There was barely any seam sealer in the bay.
-
I used a wire cup on my 4 1/2” grinder. Got all the seam sealer off real quick
-
The other week I pull the engine out of the e46.
This past week end I started to shave and stitch weld the engine bay. Welding should start this weekend.
- Jdesign and patsbimmer1
-
2
-
9 hours ago, Earl said:
If that's true, an m20 one would work too (since I have an m20 clutch for my setup). I can bring my tool Saturday
Sounds good. See you Saturday earl
my 330i
in Members BMWs
Posted
Been a very hot minute since I’ve posted anything here. Winter 2018-19 through the summer of 19 I was doing engine work on my motorcycle. And just had low motivation to work on the BMW. But I started to tear into it during COVID. I ended up pulling the whole interior, going to be going with an all black interior. I acquired most of the swap from the parts car I had 4 years ago. The dove grey interior that was in it was pretty shot. But since about this past May I haven’t really touched it til this last month or so.
I had Troy rewrap my engine harness.
I’m also planning on going back to air. Picked up some bulkhead couplings today. Ran the front airlines today. And got the black carpet in as well.
Im starting to get a good amount of motivation for this thing again. So I may be posting more in again.