Boris3
-
Posts
1573 -
Joined
-
Last visited
-
Days Won
34
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Boris3
-
-
Thanks. Agreed on price especially compared to the lip. Easiest button is just leaving it off. I saw a used set of the 5’ ramps for $100 on Chicago CL that understandably sold quick and got my hopes up that more might be out there...but I expect that’s a unicorn.
I had made a set of wood ramp extensions for my open trailer out of stacked 2x12s that are not long enough due to the ride height of the enclosed. Probably over built which explains the weight: base is 2x12x36” with a 22” top piece.
-
I keep on tearing my is lip off the racecar when backing out of the enclosed trailer. Ride height too low for the lip. I could build some long wooden ramp extensions but at 4' to 5' length these start to get heavy. I figured I 'd put this WTB for the Race Ramps Trailer Ramps out here just in case, model RR-TR-4 or 5. Don't have to be pretty, only need them to be still functional.
-
Well that's frustrating. Hope the replacement effort works out!
Search "RTIC cooler shipping issues" and issues similar to yours pop up.
One source examples:
https://www.bbb.org/us/tx/houston/profile/water-coolers/rtic-coolers-llc-0915-90041813/complaints
-
Able to get back to wrenching on the ZHP this weekend. We found a little surprise at the alignment last fall. Drivers side lower trailing arm was a wee bit bent. New versus old in the picture.
Replaced both sides. Access to the inner bolt on drivers side is certainly a pain. Joys of unbolting and shifting the diff to get to it. Passenger side is easy. -
Wow, that's so wrong on so many levels.
-
Four, the package actually never made it on the final truck but was still listed as “delivered” ... and it shows up a few days later. In my case it was UPS and came the next day though.
Hope you get it figured out!
-
Brian, so sorry for your loss.
Rich
-
Nice job!! We can talk rain lines in the future. There are deceptive places at BFR in the wet. Glad you were able to get some clean runs in. No agricultural excursions. All good!
- P_Roloff, patsbimmer1 and B C
- 1
- 2
-
updated with prettier pictures. $30 for 13 Qts
-
Anyone have a pair of e30 (4x100) 3mm wheel spacers?
-
Just in case anyone has been thinking of next level track fun. Andrew, the seller, is someone I knew from my NASA Midwest days. Buy it and come race it as is with us ex-SE30 folks in Midwestern Council's ITS class at events at BFR, Road America, Milwaukee Mile. Or drop an s52 in it and join in the transition to the revised ST classes.
Rich
----------------------------
Info from the seller:I hate to do it, but the time has come to sell my Spec E30. I haven't raced the car since June 2018 and with the birth of a second child, I don't see any time in the foreseeable future that I will be able to race. This thing needs to be on track!I built the car between 2008 and 2010. I competed in a season and a half of autocross, a couple years of HPDEs, a few years of Time Trials, then raced Spec E30 from 2016 on. The car saw roughly 4 race weekends per year. The car has a NASA logbook valid through the 2018 season. Some highlights below:-1987 model year car with diving board bumpers-SE30 Ground Control coilover suspension-Momo Daytona seat that is expired but has a back brace-Belts and nets good through 2022-Rogue Engineering steering wheel quick release-Mobius camera with dash switch included (flip the switch to start/stop recording)-Fire bottle-Spec E30 exhaust-1 mismatched set of wheels and 1 matching set of Dforce wheels-Random spares included-Hardwired AMB transponder included-Vorshlag camber plates-Unknown mileage engine-No ABS-Probably not good for drivers over 5'10" with the current harness bar (seat is almost against the harness bar, I'm 5'9" and it fits me fine).-NASA Logbook (last inspected for 2018)The car ran flawlessly for me throughout its time as a race car. I did a stock rebuild in 2010 but never had it dynoed. I was able to run mid pack with it pretty easily. The car does burn oil, but it always has. It has never been crashed, though there is a small front fender wrinkle. It just needs fresh tires, a fluid flush, and brake pads.Asking $9k. You can reach me at dandrewgilbert@gmail.com or 614-218-0622.-Andrew Gilbert -
I don’t remember the details on the engine build, my guess is at least cams and overbore. He’s been driving that car for years and always improving it. Ran ITS before EP. ITS weight minimum is 2710 so it’s wild to think of pulling 500 pounds from my car.
-
That’s Tim Schreyer in the white EP BMW. The car is light (somewhere in the 2300 lb range I think?), a built m20, and stupid fast.
-
-
20 minutes ago, KaiserRolls said:
@Boris3 that sounds really good, do you know if they are offering instructors yet?
Don’t know, sorry. The information about the whole weekend is in a pdf packet. You can access it from the link I posted. There should also be contact info.
In addition to the Friday events, Saturday is a wheel-to-wheel race drivers school all day. Sunday is the wheel-to-wheel sprint races. Finally!!! April and May races were all cancelled. I’ve been going stir crazy. -
Midwestern Council is finally up and running for this season:
Friday, July 3 at Blackhawk Farms has HPDE in the morning (three run groups, three 20 minute sessions each) followed by three hours of high speed AutoX runs (by class) in the afternoon. $200 for the full day, or $150 for only the morning DE sessions.
Info is here: https://www.motorsportreg.com/events/midwestern-council-summer-classic-hpde-hsax-1-blackhawk-farms-raceway-056695
-
I've got a full set of used m20 wires with loom, don't remember mileage but maybe somewhere in the 150k range? Might be OK for tracking down an issue. Otherwise I'd suggest just picking up a new set if yours are sketchy.
-
Much appreciated! I'll contact the seller and see if they're up for the potential plan.
-
Wow, sorry to see this. You were making good progress.
- rampelsauce and Rekpoint
- 1
- 1
-
Thanks for checking.
I found one up in Green Bay on CL in the 318i part out listing. Bit of a road trip though for a $10 used part. New one from FCP or ECS is about $25 so I may end up just adding it to a next parts order.
-
If you need a small case to play with I’ve still got my old 4.10 open from the e30 318is.
-
1 hour ago, KaiserRolls said:
Doesn’t spec e30 cap it around 65ftlbs?
Yep that's why I asked. I was curious.
Per the latest rule set: test "at the center hub nut, using a 30mm or 32mm socket and commercially available ½” torque wrench. The car will be placed on solid pavement, the right side of the car will be jacked up until the right rear tire is free from the pavement, the transmission will be placed in neutral, and the parking brake, if present, will be released. The torque wrench will be placed at the nine o’clock position with the socket on the center nut. The torque wrench will be set at 65 lb.-ft. and pushed down.If the differential does not breakaway prior to the torque wrench “breaking away,” a second and similar style torque wrench from an impartial party shall be used in a second test, immediately following the first test. If the differential does not breakaway using the second torque wrench, the car will be disqualified from the preceding race and the DQ will be noted in the car’s logbook."
I replaced my original after a wreck in 2014 with a used 3.73 only to find that it tested at 44ftlbs. Not good. My current one is a used Korman-built 3.73 that tests at 65ftlb. Much better.
-
What was the breakaway #?
-
Wondering if anyone has an e30 driver's side door blank tweeter panel (e.g., no tweeter) with all the mounting pins intact?
WTB: used Race Ramps Trailer Ramps RR-TR-4 or 5
in Parts Wanted
Posted
Hmm...I could just add a new base of 2x12x60”