problems with my 5-speed swap

[brehmer]

I just finished my swap n when I went to bleed my clutch n my slave went out. Got a new one n the same thing happened. After the third one went out I pulled the Trans out to make sure the fork was moving properly n the clutch disk wasn't backwards n everything was fine. I don't know what is wrong any one have any suggestions?

[Earl]

Are you bench bleeding the slaves before installing them? 

[brehmer]

Yes I am

[GunMetalGrey]

Do you have the TOB in the fork the correct way? the fork shouldn't have much play

[straight6pwr]

What do you mean 'slave went out'? Did the push rod come out of the cylinder? Did the seal blow out?

 

Do you have the right slave cylinder?

 

Also, i belive the word you cant think of is 'and'.

[brehmer]

The seal blew out.  And I  did double check  to make sure  I have the right  one.

[brehmer]

I'll check  the TOB as soon as I get home 

[YoungCR]

What brand slaves are you buying?

[brehmer]

Power torque  from O'Reillys

[YoungCR]

Try a different brand. I've heard non-oem slaves are hit or miss

[GunMetalGrey]

Power torque  from O'Reillys

What a fantastic name

[brehmer]

TOB is on correctly. Not sure what else to do so I ges  I'll just put it back together n try an oem  slave.

[brehmer]

Thanks for all the suggestions