-
Posts
399 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by need4speed1299
-
-
BTW, there is a cheat called slidey cars that is basically a drift mode.
-
Its a fun game. The map is huge, cars are customizable, you can golf, flip people off, fly planes, customize weapons, etc. It has the same feel as gta 4, but the graphics/lighting and game aspects are much better. Cars also sway less and blow up when you do a tripple barrel backflip off a cliff.
-
For future reference, other than what was said here, I have a couple misc things to add. I have had my share of e30 m20 no starts.
1. If no crank, there is a wire that connects to the starter sometimes refered to as the "exciter" wire. Sometimes it gets corroded or loose. It has a 90* crimped connector on it.
2. There needs to be oil in the engine and the oil level sensor on the top of the oil pan needs to be plugged in. The car wont get an injector pulse.
3. Loose cap and rotor. Be careful with those bolts for the upper timing cover, they attach to the aluminum cylinder head. If they are loose, your going to missfire.
4. The crank position sensor and reference sensor connectors on the engine harness are very close and can be swapped accidentally.
5. Some years had an injector harness connector. This can get filled with corrosion and cause no injector pulse, but rare in my opinion.
6. Major vacuum leak.
-
Bean Counters and Marketing. BMW used to be straight forward....if it said 325i on the back it was a 2.5L engine in a 3 series. They fucked that up.
Then they started adding all the different series, stopped putting the same size engine in that matched the name, etc.
Actually in the early 80s, the 320i was a 1.8l also the 325 and 325e up until 88 are 2.7l. I believe the e12 also had something similar, like a 3.0l 528?
It really never was clear.
-
Ive done an e30 c101 round engine connector to early model square e30 body harness for a 2.7i setup.
Do you plan on making an adapter or modifying the stock harness? Send me a pm.
-
It could also be the rubber hose. The hose could be acting as a check valve, basically, holding the brakes tight. I believe they make a caliper rebuild kit also. If so, the guys on e46fanatics would have a DIY. For what its worth, do both.
-
This allready happened in July. Anyway a guy totaled his mustang and now no more auto-x at Wausau Homes. Sucks because it was a blast.
Seriously? Thats disappointing.
-
Dude that picture of your hand is narly. Did you get stiches?
-
Wow that is kick ass!
-
Popeye's. I've never gone to one for some reason.
-
Bump.
-
R12 is more dense and can get a colder. Its less likely to leak. I dont see R12 locally, but with a recent law change, you can buy it online in small quantities. Most cars take about 2 lbs. Its good to put oil in there and some dye if its leaking a little. Dont use any type of stop leak.
-
Valve cover gasket.
-
Theflywheel is also different, btw.
-
-
Thanks for the heads up. Luckily Im out of the year range.
-
April fools!
-
PPs. I offered to trade him Honda.
-
"I drive honda and the shift pattern is closer together. I borrowed my brothers car for work one day( I drive honda with shorter shifting) and when I shifted short into 5th gear I ended up in 3rd gear and skipped the timing and bent the valves in the 6th cylinder, long story short the motor is bad."
The ol' blame the shift pattern excuse.
PS. I drive Honda.
-
I can't seem to ban the spammer...
-
It could be the windshield gasket, sunroof drains, heater box seal...
-
I got an 8 in Kenwood. It hits hard.
-
I use the power wash booths. I used one in January and froze my locks.Then it snowed.
-
I think thats because it was a much better episode. Merl's plan was pretty good for taking out the governor. Everybody was shooting, nobody had a clue Merl was too. Damn governor keeps getting lucky.
Parts from different cars
in BMW Discussion
Posted
Delorean Flux Capacitor
Ford 5.4? injectors
Thats it for now..