Jump to content
WI BIMMERS - Wisconsin's BMW Community

Delias95

Members
  • Posts

    77
  • Joined

  • Last visited

Posts posted by Delias95

  1. On 10/24/2016 at 6:07 PM, Delias95 said:

    The light hasn't came back on but a week or two had a p0455 and went away and hasn't re came up. I believe it's a fuel or air issue

     

    On 10/24/2016 at 4:53 PM, patsbimmer1 said:

    It's plausible but without having the car in front of me it's hard to say for sure.  Have you had it scanned for codes?

    Partsbimmer1 if you could share some of you knowledge on another thing it would be much appreciated. So from what I can tell on my 323 I should have one line going from the upper intake boot to the brake booster. Now previous owner removed upper boot and replaced it with a metal pipe. The line that would have gone from the upper boot to brake booster is now just capped off with a mini spectre ait filter. Would this cause any vaccum issues at all?? I can't find any info anywhere. 

  2. Okay so I have a 323 at w.o.T the rpms starts moving as they should then they drop about 500rpm and go as they should. I'm leaning away from clutch as it's the opposite and when it first starts going it moves fine with the RPM. Here is a video any suggestions. This is 3rd gear wot watch the needle closly not the best vid. 

    KVID0293.mp4

  3. 11 hours ago, wasnt m3 said:

    Sounds like they weren't properly torqued to begin with. Oddly enough, I just had a spark plug blow out on my daily driver Honda about a week ago. Previous owner had replaced the plugs about 10k miles ago. Found another that was backing out too. Glad you found it before damage was done, I wasn't so lucky. Mine took the remaining threads out of the head and destroyed a coil pack. Ended up needing to get the head helicoiled.

    Ouchhh!!!

  4. Update: well i should have listened when they said doubke check all fuses. Turnes out the fuse i replaced (28) was bad and i didnt notice it?  When i originaly replaced fuse 28(was blown) it didnt work at all still. Replaced with a 10a(calls for a 30a but thats all i had on hand) started up and worked great. Not to my surprise that fuse blew right away i will be buying a new 30a and enjoying my heat another day 

  5. On 2/8/2016 at 4:53 PM, patsbimmer1 said:

    That's not been my experience before but the fsu is the simplest part to replace if you want to start throwing parts at it.

    Well i have been under looking for fuses 75 and 76 i can onky find one fuse under the glove box area i removed what i could and all i see is one larger 50a fuse that does not look to be blown i belive i am hearing a little noise in the area while my head was down there i was hearing an almost thunping noise and the car has been off almost all day. When i turn the fan on it does not work but i hear an ever so slight noise. Any suggestions on finding that other fuse or the noise i am hea

  6. 3 hours ago, patsbimmer1 said:

    That's not been my experience before but the fsu is the simplest part to replace if you want to start throwing parts at it.

    Well i have been under looking for fuses 75 and 76 i can onky find one fuse under the glove box area i removed what i could and all i see is one larger 50a fuse that does not look to be blown i belive i am hearing a little noise in the area while my head was down there i was hearing an almost thunping noise and the car has been off almost all day. When i turn the fan on it does not work but i hear an ever so slight noise. Any suggestions on finding that other fuse or the noise i am hearing lol

  7. 4 hours ago, patsbimmer1 said:

    If it were the fsu then you would have blower action in the highest setting.  You probably lost your blower motor.  Was it making any noise before it failed?  ticking, squealing, etc?  I would check EVERY fuse with a test light before I replaced the blower motor.  There could be another circuit controlling the blower action that you have overlooked.

    Iv been reading forums sll day and the fsu can fail and cause no blower action at all settings

  8. E32 and e39 the same? Honestly there was little to no noise to indicate the blower was bad. I said abive there might have been some noise but the more i thinkof it any noise i heard was onsidered normal to me as iv owned roughly 110 cars.  But who knows going to have to get down and look 

     

  9. Driving like normal and randomly the blower quit. Checked glove box fuses fuse 28 was blown replaced it and nothing changed. All other fuses looked okay. Any suggestion on whay to check next. I had my battery disconnected today for like 10 minutes if that may have anything to do with 

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.