Jump to content
WI BIMMERS - Wisconsin's BMW Community

2018 F150 XLT Special Edition


SteelBlue

Recommended Posts

On 7/29/2021 at 5:26 PM, GunMetalGrey said:

Such a solid looking rig, how many miles did you end up putting on that bad boy? 
What year F150? 
Details my guy!

 

I flew to Detroit Friday night after work. My brother picked me up at the air port as he lives in Ann Arbor and stayed with him for the night. He drove me to Charlotte, Michigan, about an hour west of Ann Arbor, right away in the morning. Picked the truck up and started the 6 and a half hour drive home.

In the F30, after about an hour and a half of continuous driving, my legs and back would start to hurt, and closer to 3 hours I would not be able to drive for how uncomfortable I would be. Change of driving position in a truck makes things significantly more comfortable. When I got home I didn’t feel beat up or in pain from driving a long duration of time.

2018 F150 XLT “special edition”

Has the better grille and the black line headlights, as well as the “sport” cloth interior. It came with a bed cap, which I just sold last night for $900. I took all of the decals off immediately, swapped to a shorty antenna, removed the mud flaps, added a tailgate assist, replaced the license plate and cargo lights with LED bulbs, and added some WeatherTech floor mats.

I did replace the low beam, high beam, and fog light bulbs with some LED ones, but am having issues adjusting the aim of them. Either the additional wires and resistors from the LEDs tucked into the headlight housing is restricting the aiming, or my gear are stripped. Thankfully, Mr. @patsbimmer1 will be sourcing me aftermarket housings.

I have an Eibach strut and shock leveling kit on order, the struts should be here tomorrow. Going to have a coworker help me install when the other portion gets here. I have some 285/75R17 BFG KO2’s in my storage unit waiting for wheels. Might be working with a manufacture to get a new flow forged line they are coming out with on the truck, but waiting to hear details on that.

Have a Truxedo tonneau cover that I am waiting to have delivered to a local shop so they can install, should be early next week.

D16D04F0-8CF8-4F87-BA9A-C1DD42940348.jpeg

How it looked when I first got it

F0315D39-8417-4312-A321-2A88EA39A99C.jpeg

Decal and cap removal

9E319725-FD07-4D75-B17D-25BA1707A790.jpeg

First wash at a friends

C26778EC-BDB9-4D29-9F31-32BFEF86134A.jpeg

Cargo lights

E68869E9-5C57-4B8F-B45F-3FA9F684AEF5.jpeg

Tail gate assist (shock connecting the bed and the tail gate)

75818276-87E5-4318-A893-FDF2347D5370.jpeg

ters’

31D1606A-FE27-43C2-BEBA-5C2913F34FD8.jpeg

LED bulbs

Link to comment
Share on other sites

  • 3 weeks later...

Some other miscellaneous truck upgrades mods.

Did a mechanical decon of the paint two weekends ago and did one layer of Jescar paint sealant and then two layers of Collonite 845 wax on top. Will keep me sane until I get the truck corrected in the spring and then coat it.

Rear wheel liners. Minimize some dirt getting into places and just looks cleaner in my opinion.

Before:

91DAF49A-4995-4DAC-8AF5-5B05D2392830.jpeg

After:

94ACE3CD-D965-4853-890E-74FEB1A42517.jpeg

Front struts came in. Ceramic coated front and rears.

6C5B2AA9-16E8-4C60-A386-0147E82833C8.jpeg

Bed decals removed. I was semi torn on this because I didn’t not like them, but I think with these fender badges having the red accent around them for the “sport” edition, it looked a little busy on the side. I like the way my parents truck looks with bed decals. Can always added them back if I want.

DA9B4333-BF2D-46AD-8C13-D2288A2DFC76.jpeg

A7743787-2E6A-4E7A-A46E-B1D87A84EEFB.jpeg

Exhaust tip was crusty, was going to repaint it black, but essentially had to destroy it to get it off because it had welded itself to the exhaust pipe. Just bought an eBay one, looks good to me. I don’t know how far out it should stick? This looks fine to me, but maybe it needs to get pushed in further.

85629CEC-25FC-4E2D-8DC5-8E231541BBBD.jpeg

0A082A05-23E7-4F64-8592-D4D922B29E97.jpeg

Sold the truck cap a few days after getting the truck. Purchased a Truxedo ProX-15 bed cover. Like that it sits a lot more flush. These tonneaus are crazy expensive for some of the nicer one. This one fit the bill being about $500.

44269D3F-94EB-4C92-909B-E5C8E6BCC15B.jpeg

And my ricer mod. Found these emblem decals on Etsy for $20, figured for that little it was worth a chance. I didn’t dislike the blue oval, but wanted to see what it would like in this color rendition. I like it, but don’t love it. Real way to do it would be to pull them out and disassemble the badges and paint them. They’ll do for now.

D157D747-B367-4200-8DF5-8317346A9445.jpeg

C31D9816-9ED1-4AEE-AC42-E9B79A1A3F57.jpeg

Suspension installed hopefully soon. Just waiting on the wheels to come in, was approved for sponsorship on these new to market wheels. Went a little outside my normal comfort zone on the color, but I think it will come together nicely.

Link to comment
Share on other sites

  • 3 weeks later...

Eibach level kit was installed two weekends back. Truck rides great, the new struts and shocks really eliminated that hoppy and jumpy sensation the rear would get when going over bumps. Can’t tell a difference between this suspension and the factory stuff in terms of ride quality. Looks kind of dorky with the stock wheels and the level lol.

I had the windows tinted with 3M ceramic because I didn’t realize how much more heat comes in with the larger windows on a truck. Really like the look as well. 70% on the windshield, 20% on the front door windows, and then 70% on the rear door windows and back of the cab over the factory window tint to even out the fronts. 
 

Two of the wheels have arrived, hoping the two others will be here tomorrow or Friday. Will get them mounted on the tires whichever day they come in and then hopefully on the truck that same night. Getting close.

F16C1F75-90E5-499C-9885-C7F8160B48DF.jpeg

C6D1FFA1-30FD-4111-8848-BC7969B3E4B3.jpeg

49288D2B-AEEC-454E-8E46-CE1503DB0887.jpeg

D916490B-41BB-4B28-9C8D-5D1A854CBCA4.jpeg

Link to comment
Share on other sites

I look forward to seeing the new wheels on! 
I'd say the new decals look just fine, and I agree that they are far better than the stock blue ovals!

I enjoy that we are all here because at some point we were working on BMW's, but at the end of the day it doesn't matter what we own, because it will be getting modified. 
 

Link to comment
Share on other sites

7 hours ago, GunMetalGrey said:

I look forward to seeing the new wheels on! 
I'd say the new decals look just fine, and I agree that they are far better than the stock blue ovals!

I enjoy that we are all here because at some point we were working on BMW's, but at the end of the day it doesn't matter what we own, because it will be getting modified. 
 

It’s fun to try new things 

Link to comment
Share on other sites

I should have just started a thread for this. But here the wheels are on the truck. 17x9 0 offset VenomRex VR601BL with 285/75R17 BFG KO2’s. Offset and sizing is just right to give it that perfect almost flush/slight poke look. 
 

The look was exactly what I was going for and I am really glad I took a chance on the bronze, think they great on the truck. Wheel to tire to wheel well ratio is perfect IMO, no rubbing at all.

C5470049-B653-4C66-A2D3-B9C2AEE259C6.jpeg

812B75B4-1E2B-4511-8C44-7EEB9D0D1498.jpeg

39C86F64-A2A5-4D0A-877F-6578720B7AF3.jpeg

8FF1D1E4-2656-4579-85F7-163F2AC968AD.jpeg

Link to comment
Share on other sites

12 hours ago, KaiserRolls said:

Keep the air dam. Looks great 

I plan to keep it.

Train keeps rolling with the modifications. This one both functional and aesthetic. @patsbimmer1 has me able to actually see properly at night time now with these Alpharex LUXX LED protector headlights. I swapped the halogen bulbs for some LED ones in the stock housings when I first got the truck. Albeit an improvement, it was incremental. These headlights actually have a defined cut off point and do a great job illuminating the road. After driving my moms new Acadia that had good headlights, I’ve needed that for my own vehicle.

I think the black housings, projector “eyes”, and DRL planks fit the truck well without looking overly aftermarket.

I was very much against having to use an additional wire harness for the DRLs as I want to have as minimal intrusions to the actual functioning parts of the vehicle and to not have a rats nest under the hood. Think the tuck job came out well and was able to make a couple small notches in the fuse box for the trigger wire to run through that still allows the box to seal properly.

0CE5237C-D031-4D95-9B42-B40B899C9AE5.jpeg
 

3D5A7813-4FB1-4BD0-A323-B4CA14E05D72.jpeg

 

829A4F7C-FE58-4396-A23D-1B5C39D107D2.jpeg

AD61B913-89A7-40C6-A8AC-114483C9B395.jpeg

F4EF75AB-42E1-411E-987D-8D15791621F9.jpeg

EC6091F5-C07B-4089-8DF9-B96EB160D5EE.jpeg

F9143FD9-8A83-4248-A413-CD04FD3F9645.jpeg

Link to comment
Share on other sites

On 9/20/2021 at 12:13 PM, REKIII said:

I'm getting all jelly with your ford mods.  Recently sold my Gen2 Raptor and picked up a Sierra.  What a different world.

Huge pile of mods to do to it to 'make it mine'  Should be fun, but I do miss the Ford.
Love the color of yours, great choice on the wheels!!!

Gen 2 raptor is the dream for an unnecessary daily driver. Not a huge fan of the newer GM interiors, think the Ford ones are better.

Funny enough a co worker has pretty much Raptor I want, in the same color as well.

93FF6EE8-3A61-4A95-8104-58B5C59CED60.jpeg

Link to comment
Share on other sites

On 9/20/2021 at 1:28 PM, SteelBlue said:

Gen 2 raptor is the dream for an unnecessary daily driver. Not a huge fan of the newer GM interiors, think the Ford ones are better.

Funny enough a co worker has pretty much Raptor I want, in the same color as well.

You vs the guy she tells you not to worry about? 

Link to comment
Share on other sites

Agreed on the interiors.  Ford is way ahead.  Looked and looked for an F250 Lariat Black edition Diesel and couldn't find one, dealers that had them wouldn't deal on my truck, dealers that didn't were offering me the moon for it....so weird.  So, I found a Sierra and made a deal.  Very weird, but I made out OK.

Your coworkers truck looks great!  Ask him if he's interested in a RPG bumpstop kit, or fender liners, or mudflaps, or 2" drop shackles or Cobb Tuner.  All new in box (except the cobb, I'd have to see if it can be sold or if it's permanently married to my old truck).  I have some parts to get rid of..... hahaha.

Link to comment
Share on other sites

1 hour ago, REKIII said:

Agreed on the interiors.  Ford is way ahead.  Looked and looked for an F250 Lariat Black edition Diesel and couldn't find one, dealers that had them wouldn't deal on my truck, dealers that didn't were offering me the moon for it....so weird.  So, I found a Sierra and made a deal.  Very weird, but I made out OK.

Your coworkers truck looks great!  Ask him if he's interested in a RPG bumpstop kit, or fender liners, or mudflaps, or 2" drop shackles or Cobb Tuner.  All new in box (except the cobb, I'd have to see if it can be sold or if it's permanently married to my old truck).  I have some parts to get rid of..... hahaha.

Same experience looking for an F250 XLT diesel in velocity blue.  I came across a couple where the “market adjustments” were astronomical as well. I’m holding out for a bit since my F150 still does what i need it to.

Link to comment
Share on other sites

Mods keep coming, but this is likely the last for a while. The F150’s that did not have the premium stereo options are pretty widely regarded as dog shit. I agree, it’s a serviceable system that does the job but is not good. Even after the F30’s non HK system, there was a lot to be desired. I purchased the following Infinity Reference speakers to do a complete 7 speaker replacement.

CB000222-C375-4FD8-A695-1797D960906E.jpeg

This is my first attempt into car audio so ordering through Crutchfield was a big help and the included adapters made things really straight forward for the door speakers. Tweeter and center console was some pretty straight forward butt connections.

This came with crossovers, but trying to route the wires is not something I am interested in taking on at the time being. Future project. You can see there’s a pretty significant difference in just the speaker build alone:

F6A1FAB4-3556-45A5-ADBF-370481B5F559.jpeg

A39B8341-B303-4E0F-842A-5F7DFCB1A791.jpeg
 

Overall, worthwhile improvement. Significant increase in just overall sound quality and texture, which is exactly what I wanted. A little additional bass as well. After doing this, I think a sub is required. Kicker makes a powered sub that fits behind the rear bench seat that looks just like the OEM style ones.

Link to comment
Share on other sites

On 9/23/2021 at 7:12 AM, SteelBlue said:

This came with crossovers, but trying to route the wires is not something I am interested in taking on at the time being. Future project.

I'm a bit confused by this statement.
You got a component system, and didn't run the crossover? Are you not using the tweeters on the 9630?

At any rate, I have the same speakers in the Titan (to replace one blown speaker...) and have been pleased with their quality and ability to handle high volume with great clarity. 

Link to comment
Share on other sites

7 hours ago, GunMetalGrey said:

I'm a bit confused by this statement.
You got a component system, and didn't run the crossover? Are you not using the tweeters on the 9630?

At any rate, I have the same speakers in the Titan (to replace one blown speaker...) and have been pleased with their quality and ability to handle high volume with great clarity. 

To connect the crossovers with the door speakers, they both have to route to the cross over. One way shape or form, some wire has to pass through the door for either the tweeter or the door speaker. I was not about to drill a hole through the molex connector in the door loom(which is how I saw people were doing it). And I don’t want to have a miscellaneous wire hanging in the door. Next time you’re back, you can hook it up and route it for me😁

I am using the tweeters, just have them connected to the factory tweeter harness.

Thank you to @YoungCRfor creating a separate thread for this. What I should have done from the beginning.

I said I would be done with mods, and I kind of lied. Albeit, this one isn’t a new item, but more of a rerouting. I was tired of having my phone cable strewn over my center console area from having to plug into the Sync ports at the front of the console. I also couldn’t ever close this roll top door at the front of the console due to this cable running out of it. The importance of the cable, is that it connects my iPhone to the truck to utilize Apple Car Play. Since this isn’t a 2021, I do not have wireless Car Play and have to have a hard wire connection like a peasant.

The solution? Drill.

Pulled the shifter trim surround off and was able to make some small holes in a couple of places to allow me to snake the iPhone cable through the structure of the center console to allow me to still use the function of the cable, but have it “hidden”. 
 

This took me about 10 minutes, $2 in grommets, and made my center console area way more orderly. Love the result.


FE5B77F7-4E56-4B9B-935F-903F76B1923F.jpeg


A3E23FDE-E38F-4CE5-B5EA-16E3C719C93F.jpeg

B2B9343E-0F03-4113-BF4E-751324B5CDFC.jpeg

C64BF810-611D-41E3-BB83-99296E58D9F1.jpeg

787FBB7A-4FA5-4E82-828D-B6CDFA1E990F.jpeg

8404AE13-D4C9-43BD-80FC-BE8246C28154.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.