Jump to content
WI BIMMERS - Wisconsin's BMW Community

Garage cleanout! E30, E36, E46 parts for sale


m42b32

Recommended Posts

I will be continuously adding parts over the next few weeks as I come across them, so if you like dirty old car parts as much as I do, make sure to check this often. 

Cleaning out my garage/basement/shed/etc. Prices are all OBO and do not include shipping if you need them shipped. I'd rather not ship larger items. 

 

- E30 sedan doors. Drivers front (complete), passenger rear (complete), driver rear (gutted, but I have the glass). Some rust, but no dents. Driver front door window regulator worked when pulled, rear door did not but could've been a switch or something. Glass in good shape. All doors are FREE. 

49932778142_59112ba3d0_b.jpg

 

- E30 passenger side front frame horn/bumper shock mount. No rust, can be used for damage or rust repair. Was taken from a late model vert, though I believe they are all the same for all years (early and late model). $10

49932776982_58044753f9_b.jpg

 

E30 318is exhaust rear section. I have since cut off the rear muffler right at the flange (it was not original and cracked). Use it to replace a rusty flange/resonator and weld on a new muffler. No rot, only minor surface rust. Or you can scrap it, doesn't matter to me. free

31682581045_bc14f2580b_b.jpg

 

- E30 Vogtland lowering springs. Unknown mileage, but rode great. Sets the car at a nice ride height, not slammed. $100

50276636121_2eb0f743a9_c.jpg

 

- E36 M3 FX stage 2 chromoly lightweight flywheel and clutch. The clutch disk is pretty worn, can be used as-is or the flywheel can be resurfaced and paired with a new clutch/pressure plate. $50

50276793107_0f89d45854_c.jpg

 

- E36 coupe trunk lid in ok shape, Alpine White III. ~2" rust spot on the back but it is not through the metal as far as I can tell, came off my '99 e36 m3 (pictured). M3 badge, roundel, trim pieces, etc. not included, it is just the sheetmetal. Free

31764842073_c013351097_c.jpg

 

- E36 6cyl Zionsville 16" fan shroud and aluminum expansion tank. This is really well made and fits perfectly. You can mount any 16" SPAL puller fan. I had this on an M42 e30 (with e36 radiator), It will not fit a 24v swapped e30. It is missing the lower heater return hose tray piece. https://www.zionsvilleautosport.com/store/bmw-e36-add-on-aluminum-radiator-shroud-and-expansion-tank/ $200 obo (fan not included in this price, fan listed below). 

50275958798_0594a35211_c.jpg

 

- SPAL 16" curved blade puller fan (pictured above), 2024 cfm, part number 30102049. Dimensions are 16-5/16'' x 15-3/4'' x 3-7/16''. This is the deeper profile fan, definitely not enough room on a 24v e30, but can apparently be fit on an e36 6cyl (I had it on an m42 e30). I bought this new in 2017, only used for 1 summer. $100.

50275958543_fa0d479715_c.jpg

 

- BMW Style 4 wheels. 16x8 et23, 5x120, 72.56mm center bore. These are factory forged OEM wheels and were an option on the e38 7 series, not very common. Exact same fitment as the e38 style 5's. I do not have center caps. They have been poorly spray painted black but there is no curb rash or bends/cracks. $300 obo. (I will post more pictures this weekend). 

41719300814_e7f405f381_c.jpg

 

Link to comment
Share on other sites

34 minutes ago, Boris3 said:

If no one else needs it, I'll take the e30 steering rack.

It's yours if you want it! I will PM you

 

19 minutes ago, B C said:

I'll come by this weekend and pick up that old white car with the base model E39 engine in it. I can only do $2500 since it doesn't have airbags or traction control and I will be using it to transport my kids to and from daycare. 

 

I think that's fair. I'll roll it out to the curb, just put the money in the mailbox. It's the perfect kid transporter, the lack of rear doors is a huge upgrade over your standard child locks. 

Link to comment
Share on other sites

On 7/21/2020 at 10:48 AM, timmer said:

Need two of these if you have any!! I put E30 sport seats in my E21 and the clips are too short on the early models for the buckle...  Thanks!

 

0CDCAEA1-9474-44C6-BCD7-B1AFAE46436A.jpeg

I have a pair of coupe front seatbelts with the long buckles. One is locked but if you're just looking to use the buckle itself that would work perfectly. I may have a working pair of sedan buckles but couldn't find them in a quick look yesterday. 

Link to comment
Share on other sites

37 minutes ago, trevgah2 said:

Any decent wheels in the pile?

I have a set of 5 e30 steelies with some old tires, a set of 4 5x120 et23 style 4s (no center caps or tires, need a refinish), and a set of 4 OZ wheels, dont know the model but they clear e36 m3 front brakes, 16x7.5 et35ish 5x120, mounted with a decent set of 205/55/16 general altimax arctic snow tires.

Link to comment
Share on other sites

  • 2 months later...
  • 2 months later...
  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.