Jump to content
WI BIMMERS - Wisconsin's BMW Community

2005 Nissan Titan


Recommended Posts

211k Miles -  No large rust (Georgia truck) with a very clean frame, lil bit of surface rust here and there. Back corner had a trailer pushed into it right before I bought it. 

Crew Cab with 5.5' bed, with liner, 7,500lb towing capacity. I personally have dragged around 5,500lbs of trailer and it does it very smoothly. 
2x4 (Georgia things!) and honestly with 300lbs of sand in the bed it felt like driving a car on half tread snow tires. Quite a lot of fun to throw it sideways and just zip around in 12" of snow. 
It is on some aftermarket wheels with good tread tires (Big O brand?) but could negotiate further for a stock set of wheels with BFG KO2's that I put on less than 6 months ago (1k in tires)

Recent maintenance: All brakes and rotors, Bilstien 5100 front shocks, KYB Gas A Just rears, front wheel bearing, lower ball joints, starter, plugs, MAF, serpentine belt, all belt idlers, new AC condenser, coolant flush, trans fluid. Basically I took care of any potential issues of it running for another 100k miles!

Superchips flashpack tuner, in winter with the tonneau cover and the MPG tune I would do about 20mpg highway. It averages better mileage than most newer trucks of people I know. 

Does not burn or leak any fluids. 

This has taken me out to Colorado and all over the UP without skipping a beat and had I not come across the long wheelbase one I would be driving this one for many moons yet. 

WiBimmers price of $3,600

IMG_20190504_182622

 

IMG_20190504_182615IMG_20190504_182609

 

IMG_20190504_182600IMG_20190504_182551IMG_20190504_182651IMG_20190504_182642IMG_20190504_182630IMG_20190504_182701IMG_20190504_182717IMG_20190504_182800IMG_20190504_182708IMG_20190504_182816

 

Link to comment
Share on other sites

4 hours ago, straight6pwr said:

are the rear fenders on these trucks a replaceable panel, or are they part of the box and cutting/welding would be required?

Part of the box.

The dent could be pushed out a lot better than it is, but I never got around to messing with it more than what is shown. 

Link to comment
Share on other sites

16 hours ago, Boris3 said:

It's a $4k truck, as long as it's not rotting from rust or rubbing the tire the dented fender isn't an issue.

I wasn't entirely sure where to price it, but we all know the WiBimmers price has more flex than your average joe. 
The frame is indeed in very good shape, only the seams have any tell of Wisconsin use. Really no surface rust on anything underneath. It's handy. 

No rubbing anywhere! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.