Tkuhn Posted November 7, 2019 Author Report Share Posted November 7, 2019 Got the girls unloaded from the trailer. Little battered and bruised from this year but we have all winter! In the above photo you can see how Sam's front end is shifted if you look at the front tires. and here's some more detailed photos of the damage to my car. VID_30031127_163247_054.mp4 VID_30051214_055449_477.mp4 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 9, 2020 Author Report Share Posted January 9, 2020 UPADATE! Been fairly quiet, snagged up a mint ass center exhaust bracket while at the junkyard. Also got a sweet intake off amazon lol will post photos once installed but its really well made for $140 and is basically a AFE replica. Pretty amped on it. AND SOME GREATTT NEWS! I cannot thank @Sam_Holzmann and his dad enough for the transport to and from the body shop. The car is back at the shop and STRAIGHT! Now this was done as a side job so all we had them do was pull the quarter straight, hang the door and get the metal as close to where it originally was. Some putty work and paint to seal it and we are in business! SUPER excited to be able to get working on the car again now 🤘 P_Roloff and patsbimmer1 2 Quote Link to comment Share on other sites More sharing options...
B C Posted January 9, 2020 Report Share Posted January 9, 2020 How do you salvage the wrap job? Cover the seam with diagonal stripes? patsbimmer1 1 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 9, 2020 Author Report Share Posted January 9, 2020 11 minutes ago, B C said: How do you salvage the wrap job? Cover the seam with diagonal stripes? Most likely will just re wrap the whole side. I'm not really onto the M stripes haha especially since it's not and M and even if I was it's not really my style Quote Link to comment Share on other sites More sharing options...
B C Posted January 9, 2020 Report Share Posted January 9, 2020 Ah yeah, I was implying some generic kind of stripe, im definitely in agreement over not blaspheming the Motorsport colorband 😄 Rekpoint and Tkuhn 1 1 Quote Link to comment Share on other sites More sharing options...
Rekpoint Posted January 10, 2020 Report Share Posted January 10, 2020 Looks like they did a decent job for a drift car! See.. if you weren't in Wisconsin where there is an off season for drifting you probably would have left it! Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 11, 2020 Author Report Share Posted January 11, 2020 On 1/9/2020 at 7:10 PM, Rekpoint said: Looks like they did a decent job for a drift car! See.. if you weren't in Wisconsin where there is an off season for drifting you probably would have left it! Hahah I'm thankful for an off season, it allows the cars to progress and get the refreshing they need. And honestly I absolutely HATE the stereotype that a drift car should be smashed and shitty.... that's not how it should be lol the midwest has a pretty good reputation though for having fairly nice built and refreshed cars. Thanks to the off seasons. Drifting is a rolling car show. Rekpoint 1 Quote Link to comment Share on other sites More sharing options...
Rekpoint Posted January 11, 2020 Report Share Posted January 11, 2020 1 hour ago, Tkuhn said: Hahah I'm thankful for an off season, it allows the cars to progress and get the refreshing they need. And honestly I absolutely HATE the stereotype that a drift car should be smashed and shitty.... that's not how it should be lol the midwest has a pretty good reputation though for having fairly nice built and refreshed cars. Thanks to the off seasons. Drifting is a rolling car show. I 100% agree. If you are not looking good doing it. It shouldn't be done! Tkuhn 1 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 13, 2020 Author Report Share Posted January 13, 2020 FINALLY got some time to work on the car today. Alone in the shop was something I definitely needed as of recent and it felt great to get my hands on the car again! First off I gutted the old door to have spare parts if needed. Plus it will make a cool walls hanger. Not sure if mentioned this but the window didnt break and it was salvaged too. I did find that the lock was broken when I pulled it from the handle, luckily I found a rebuild kit on amazon for $8 and it has good reviews. Was pretty excited that I dont need to re-key the car. Below you can see where its cracked. Also washed the car for the first time since October which feels good. And the plan is to get a proper cage in the car this winter so I pulled out the floor plates and all the dash accessories. Now all that's holding in the dash is the mounting bolts itself. Lots of work ahead yet but felt great to get back in the shop. _Wackster 1 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 21, 2020 Author Report Share Posted January 21, 2020 Update. Small one, didnt get a whole lot done this weekend. The blower motor stopped working a week before the last drift day and I finally got around to ordering a new one. We had checked for power before I went and ordered one. Turns out it wasnt the blower motor so that was a great way to start the day. I'll be ordering a resistor even though I didnt think that was the problem. After reading it seems these resistors aren't the same as normal ones that when all the others I have dealt with work on high only when bad the e46 ones can just take a shit all together. I moved on to fixing the broken door lock. Disassembled. here's the broken/cracked parts. and the lock successfully assembled and working smooth 👍 I did use some of the good original parts over because well they were fine and no need to put some Chinese pieces in. Lol I kept the retainer and the spring from the original lock. Fron there I moved on to assembling and installing the intake I got. It's from amazon, actually a really nice product and fit. And about half the price of an AFE. Now the only major downfall of the whole having a real intake thing is that I went full honda boy and shaved all the studs and holes in the engine bay LOL. So now I'll be drilling and having to put in some nutzerts to keep this thing in place haha. Nick_F, Jdesign and jc43089 3 Quote Link to comment Share on other sites More sharing options...
SteelBlue Posted January 22, 2020 Report Share Posted January 22, 2020 How much does a shop space like this go for(assuming you are renting)? Looks a lot nicer(and cleaner) than my current setup lol Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 22, 2020 Author Report Share Posted January 22, 2020 1 hour ago, SteelBlue said: How much does a shop space like this go for(assuming you are renting)? Looks a lot nicer(and cleaner) than my current setup lol This is Sam's shop. He is gracious enough to allow me to have my car there this winter. Mostly for some fab reasons. I have space at home for the car which is nice to not have to drive to work on it but I cant do what we have planned at my home garage. Normally it would be at home. My old shop space was about a 3 car that we paid around $250 a month for but I moved out of there when I moved houses and there was room at the new place to work on and keep my car at. So I cant really put a number on it lol. From places that friends have been before though a space this size would probably be $850+ per month. Quote Link to comment Share on other sites More sharing options...
wasnt m3 Posted January 23, 2020 Report Share Posted January 23, 2020 I've dealt with a handful of e46s with blower motors inop, every time it was the resistor. Tkuhn 1 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 23, 2020 Author Report Share Posted January 23, 2020 19 minutes ago, wasnt m3 said: I've dealt with a handful of e46s with blower motors inop, every time it was the resistor. Welp atleast I'll have a new motor and resistor and know it's good for awhile lmao. Just threw me off since there was power at the motor. Based on all my other experiences. I went to school for automotive mechanic and now I'm a diesel tech. Been wrenching for almost 1p years now so I was like oh easy. Lol but bmw outsmarted me 😂 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 27, 2020 Author Report Share Posted January 27, 2020 Update Finished pulling the dash out of the car after some conversations about the cage placement. Pulled the sunroof and then pulled all the wiring down to separate it. Only going to be running the done light wiring back up after the cage is done. Now that the tube is ordered it's time to really prep for the cage. Made what I like to call a "CAD" design for the front rocker boxes. Driver side. Passenger side And then I removed some of the rear panels that will be in the way of the rear boxes, not really sure what to call them. Kinda blew a hole where one of the welds were but easily fixable. And then I made up templates for the passenger box but called it quits for the weekend after this one. Still a rough design. patsbimmer1 1 Quote Link to comment Share on other sites More sharing options...
straight6pwr Posted January 27, 2020 Report Share Posted January 27, 2020 "CAD" cardboard aided drafting 😂 Tkuhn 1 Quote Link to comment Share on other sites More sharing options...
Jdesign Posted January 27, 2020 Report Share Posted January 27, 2020 11 hours ago, straight6pwr said: "CAD" cardboard aided drafting 😂 I was going to say "Cardboard Aided Design" Tkuhn 1 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted January 27, 2020 Author Report Share Posted January 27, 2020 8 hours ago, Jdesign said: I was going to say "Cardboard Aided Design" Yes that's why I put it in quotes lmao. I've always called it cardboard aided design too Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted February 3, 2020 Author Report Share Posted February 3, 2020 Update. Revised the front cage box design, measurements only so not much to show there. Also revised and finished the rear cage boxes. Then we cut, bent and did ALOT of trimming to get the rear boxes to fit as snug as possible. Still might need a little more trimming but pretty happy with it. The cage will most likely be mig welded just because we dont have the torch time to do tig. I have never learned to tig, and I'm ok at mig. Moved on to starting to clean up the body work from the dent being pulled. Layed down some filler. And then sanded. ALOT more detailed filler work and sanding is ahead but it's a start! Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted February 9, 2020 Author Report Share Posted February 9, 2020 Not a whole lot of progress this weekend but got something done that I've been meaning to do since I first built the car. Before I scrapped the stock bumper and bumper supports I cut off the tow hook threads, finally got around to welding them to the bash bars. Here's the front. I welded the threaded chunk into a piece of tube then to the bar. Worked out really well. The rear was alot simpler since I had added the jack point last spring. Lined up perfect so all i had to do was burn the piece right to the bar. little thing that wont be noticed really but it felt good to get it done. Both just need some paint and are complete. I also made some "CAD" templates for the rear door panels once the cage is in. I wont be able to fit the stock panels with how we are doing the cage so I'll be cutting them out of the same ABS that I made the bulkhead out of and then using nutzerts and some nice hardware to secure them. P_Roloff, Jdesign and B C 3 Quote Link to comment Share on other sites More sharing options...
B C Posted February 9, 2020 Report Share Posted February 9, 2020 CAD = Cardboard And Duct tape? Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted February 9, 2020 Author Report Share Posted February 9, 2020 6 minutes ago, B C said: CAD = Cardboard And Duct tape? Cardboard aided design hahah but that's a good one too! Jdesign and B C 1 1 Quote Link to comment Share on other sites More sharing options...
patsbimmer1 Posted February 9, 2020 Report Share Posted February 9, 2020 I like this every time it's updated Tkuhn 1 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted February 9, 2020 Author Report Share Posted February 9, 2020 1 minute ago, patsbimmer1 said: I like this every time it's updated I do my best! Honestly alot of the reason I update even on the littlest things is for myself. When I built my civic over the 8 years I had it I barely updated the build thread I did have, which was so much work. And sometimes the little stuff is informational and might help someone else too! Jdesign 1 Quote Link to comment Share on other sites More sharing options...
Tkuhn Posted February 19, 2020 Author Report Share Posted February 19, 2020 So I've wanted to change my orientation of the handbrake for awhile now. I've seen a few people run the pull back style on the left of the shifter and use/make the window switch slot larger to accommodate for the throw of the handle. Now that chase bays makes a pull back reverse mount handbrake I thought it was time to make it happen. Still need to order the brake but we have begun planning. My biggest issue with what I want to do is most people just let the window switches hang. Which I'm not cool with lmao. Of course this project began with some Cardboard Aided Design, I didnt take any photos of that. But then @Sam_Holzmann went full design boi on it for me. The window switches are both being relocated to where the cup holder/slider thing normally is in the center console. And then a small cubby added. Mostly because it would be dumb to not have anything else there. Actual computer design. And the first print. Which took 44 hours. As of now he is going to make some tweaks for the hopeful final print. I'm super hyped for this one off piece! I cannot thank Sam enough for this one, it will be so much nicer than anything I could have made out of an ABS sheet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.