Bassboy3313 Posted November 19, 2018 Report Share Posted November 19, 2018 band saw for sure. I ended up getting the portaband from Harbor freight. Slapped a Milwaukee blade on it and welded up a stand for it as well. Works wonders for these kinds of things. Jdesign 1 Quote Link to comment Share on other sites More sharing options...
HipMF Posted November 19, 2018 Author Report Share Posted November 19, 2018 12 hours ago, snap said: Very impressive ingenuity as usual! Perhaps these may be helpful? its not the way its usually merged for a turbine flange but it may prevent a headache or two https://caautoparts.com/products/2-25-4-4-1-exhaust-merge-collector-excol-225-4-ss?variant=40443660105&gclid=EAIaIQobChMI8bGJ4IPg3gIVhbjACh1EFQBcEAQYCSABEgJpxPD_BwE If I fail at DIYing one, I could do something like that, but I don't accept defeat easily... There isn't really a need to transition to a round tube, because the turbo inlet is kind of square-ish anyway. I planned on cutting the turbo flange to the shape of the pipes to make life easier. Quote Link to comment Share on other sites More sharing options...
HipMF Posted November 19, 2018 Author Report Share Posted November 19, 2018 6 hours ago, Jdesign said: Might I suggest a band-saw? No really, You work a few blocks from me and I should have everything you need here besides your car. Mark what you need cut and shoot me a text and come cut it. ;D This could be an option. The problem isn't as much the tool that's being used to do the cutting as it is holding the tube in the proper position while it's being cut. Even if I had a nice bandsaw, I would still need a "sled" to hold the tube at the correct angle, and a way to rotate it exactly 90 degrees before making the 2nd cut. Jdesign 1 Quote Link to comment Share on other sites More sharing options...
Jdesign Posted November 19, 2018 Report Share Posted November 19, 2018 1 hour ago, HipMF said: This could be an option. The problem isn't as much the tool that's being used to do the cutting as it is holding the tube in the proper position while it's being cut. Even if I had a nice bandsaw, I would still need a "sled" to hold the tube at the correct angle, and a way to rotate it exactly 90 degrees before making the 2nd cut. That's very true, but I find it hard to imaging that Frankenstein clever set up you have not shaking you into a seizure while trying to make a precise cut. Quote Link to comment Share on other sites More sharing options...
HipMF Posted November 20, 2018 Author Report Share Posted November 20, 2018 6 hours ago, Bassboy3313 said: band saw for sure. I ended up getting the portaband from Harbor freight. Slapped a Milwaukee blade on it and welded up a stand for it as well. Works wonders for these kinds of things. Was checking these out and they look pretty decent actually. The porta-bands I've used have been way better saws than any of the cheap band saws I've ever used. Bassboy3313 1 Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted November 20, 2018 Report Share Posted November 20, 2018 That watermark is way too coincidental, also looks way to legit to have your name on it That being said, seems like you could have better results with a setup like that. Jdesign 1 Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 3, 2018 Author Report Share Posted December 3, 2018 Merge collector saga continues... I came up with a jig to use the sawzall contraction to cut the tubes (piece of angle iron, some door shims, and electrical tape). Tried it out and was not satisfied with the results. After that, I came up with a different plan to make a jig with the CNC router and the mill at work. However, in the interest of actually getting something done, I changed my mind and just did it the way I usually do things. The hard way. Everything needed to build a merge collector: Many hours spent on this. Will just buy a collector next time. I forgot the camera at home, and didn't take any in-process pictures. The results turned out okay though. Some small gaps, but shouldn't cause a problem. Next step is to make a turbo flange. After that I'll finally be able to do the fun part. m42b32, Jdesign, GunMetalGrey and 3 others 6 Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 6, 2018 Author Report Share Posted December 6, 2018 Mill-drill sending a 1.5" holesaw cup through 3/8" steel like it was butter. The trick with hole saws is to set the RPM as low as it will go and leave the belts loose to act as a clutch in case things go south. Very little heat generated, and the cup is still sharp. Could probably do this all day without wrecking it, compared to using a drill press which will burn it up trying to up drill through sheet metal... jc43089 and Jdesign 2 Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 10, 2018 Author Report Share Posted December 10, 2018 Did some precision sawzalling Finished up with the grinder. Flattened out the top of the collector and tacked that on. And started running some tubes. Looking good so far. Unfortunately it will have to come back apart to get welded. I'll have to pull the collector apart to weld 360 degrees around the tubes that connect to it. It'll be a challenge to get at everything that needs to be welded. Will definitely have to sit down and practice on some scrap before I start on this. P_Roloff, Bassboy3313 and Jdesign 3 Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted December 10, 2018 Report Share Posted December 10, 2018 Can confirm that this stuff is shaping up to be quite awesome. Jdesign 1 Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 18, 2018 Author Report Share Posted December 18, 2018 More progress. After figuring out where to run the last two pipes I decided to take it back apart and start welding stuff. My welding isn't pretty but it should be good enough. Where I left off tonight. Test fit in the car. It's snug. I've still have some more welding to do, but I'm pretty happy with how it's shaping up. It was a pretty ambitious project, so I'll be happy when I'm at the point where I can cross "manifold" off the to-do list. Hopefully I'll have some time this week to make a flange for the downpipe. That will be the next project. m42b32, suspenceful, P_Roloff and 2 others 5 Quote Link to comment Share on other sites More sharing options...
B C Posted December 18, 2018 Report Share Posted December 18, 2018 Great work, Mike! Im enjoying these updates Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 18, 2018 Author Report Share Posted December 18, 2018 15 hours ago, snap said: Great work, Mike! Im enjoying these updates Thanks. The goal is to have the car running by April. It's hard to believe the engine has been out of the car for 7 weeks already, so if anything I'm probably a little behind schedule. The header is obviously the most complicated and difficult part as far as fabrication is considered, so hopefully things will start to come together faster after I get the exhaust sorted out. I'm also planning to build a legit ECU harness from scratch, so that will take some time. Sustained progress will be the key to meeting my self-imposed deadline, so you can look forward to weekly updates until spring. P_Roloff 1 Quote Link to comment Share on other sites More sharing options...
m42b32 Posted December 18, 2018 Report Share Posted December 18, 2018 That looks great!! Quote Link to comment Share on other sites More sharing options...
Jdesign Posted December 19, 2018 Report Share Posted December 19, 2018 Nice Update! Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 26, 2018 Author Report Share Posted December 26, 2018 Thanks @patsbimmer1 for getting me nice discount on a big box of stuff from ECS. Didn't accomplish much this weekend, but the manifold is nearly done. I just need to get a longer burr to clean up some of the welds inside the collector. My intercooler also arrived, so if making a downpipe isn't enough to keep me busy, I can try to figure out how to get that mounted up. Jdesign and patsbimmer1 2 Quote Link to comment Share on other sites More sharing options...
Jdesign Posted December 26, 2018 Report Share Posted December 26, 2018 15 hours ago, HipMF said: My intercooler also arrived, so if making a downpipe isn't enough to keep me busy, I can try to figure out how to get that mounted up. What is this out of? It looks like a F30/32 intercooler? Quote Link to comment Share on other sites More sharing options...
patsbimmer1 Posted December 26, 2018 Report Share Posted December 26, 2018 That manifold is looking great! Quote Link to comment Share on other sites More sharing options...
suspenceful Posted December 26, 2018 Report Share Posted December 26, 2018 55 minutes ago, Jdesign said: What is this out of? It looks like a F30/32 intercooler? I'm also curious... I have a stock N54 intercooler that I would've parted with. Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 26, 2018 Author Report Share Posted December 26, 2018 3 hours ago, Jdesign said: What is this out of? It looks like a F30/32 intercooler? 2 hours ago, suspenceful said: I'm also curious... I have a stock N54 intercooler that I would've parted with. It's from an ecoboost mustang. An N54 intercooler is twice as thick. I might have used one, but I wanted something with normal slip-fit connections instead of the weird clippy things that BMW uses. Jdesign and suspenceful 2 Quote Link to comment Share on other sites More sharing options...
HipMF Posted December 31, 2018 Author Report Share Posted December 31, 2018 Ecoboost intercooler is too wide. I've only got 26" between the frame rails and I haven't been able to find anything that will fit nicely in there. This one is about 28". I was thinking I'd just do some sweet mods to core support to make it fit, but it looks like I still wouldn't be able to get it to fit where i want it. Back on the hunt for an intercooler... Got a longer burr and finished up the grinding I wanted to do on the manifold. Back to my hobby of making artisanal turbo flanges (aka: still doing things the hard way): The last one was easy because the shape was mostly straight lines, so it was easy to cut out with the sawzall. This one; not so much. I should have had it laser-cut like the header flange, but it's too late for that now. The dream: After a lot of cutting, grinding and filing, it was on to the mini-lathe to cut a shoulder to match the turbo's flange. Finally putting down some decent welds. Filets are a lot easier to make look nice than butt-welds. And where I left off: I was hoping to keep the existing exhaust unmodified so that I could drop a stock motor back in without having to change anything. That's not going to happen. It's a really awkward number of weird bends that need to happen in too small of a space. If I cut it back 6 or 8 inches from where it is right now my life will get a lot easier. Brake line will have to get moved somewhere less hot... Quote Link to comment Share on other sites More sharing options...
YoungCR Posted December 31, 2018 Report Share Posted December 31, 2018 Keep the exhaust section you cut off and then make a matching flange, then you could just swap the turbo downpipe section out still. Quote Link to comment Share on other sites More sharing options...
HipMF Posted January 2, 2019 Author Report Share Posted January 2, 2019 On 12/31/2018 at 4:38 PM, YoungCR said: Keep the exhaust section you cut off and then make a matching flange, then you could just swap the turbo downpipe section out still. That's pretty much what I was planning. Hopefully the turbo works out and I won't need it. 🌮 Quote Link to comment Share on other sites More sharing options...
straight6pwr Posted January 2, 2019 Report Share Posted January 2, 2019 i like your dedication to using the tools you have at hand. the manifold looks great! Quote Link to comment Share on other sites More sharing options...
GunMetalGrey Posted January 3, 2019 Report Share Posted January 3, 2019 You never cease to amaze me with what you can make with basic tools. It's looking awesome, and I can't wait to hear it running! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.