GB-335xiCoupe Posted April 23, 2018 Report Share Posted April 23, 2018 22 minutes ago, suspenceful said: If you want me to print this, I could do it (without the light blue). It'd also be the most layered vinyl printed shirt I've ever done. Price from me would be $25 shipped on a heather gray Gildan tee. That doesn't include a cut to Mr Bassboy. I'm happy to make it happen if you guys (and Bassboy) are down! Why no light blue? Too infringement-like? Quote Link to comment Share on other sites More sharing options...
suspenceful Posted April 23, 2018 Report Share Posted April 23, 2018 6 minutes ago, GB-335xiCoupe said: Why no light blue? Too infringement-like? The color has nothing to do with infringement. This whole design/BMW logo itself is copyrighted and it's a no-no to sell it either way. With that said, I don't do screen printing. I use heat-adhesive vinyl and each color requires another process/layer. I don't have light blue in stock and don't want to buy vinyl just for this (and it'd drive the price up). Quote Link to comment Share on other sites More sharing options...
B C Posted April 23, 2018 Author Report Share Posted April 23, 2018 Who gives a shirt about shirts, how fast can you run a mile? Daggerty, Ryan..., m42b32 and 3 others 3 3 Quote Link to comment Share on other sites More sharing options...
Ryan... Posted April 23, 2018 Report Share Posted April 23, 2018 I would like to say that I was in cross country back in my prime where ripping off 3 miles at a 6 minute clip was considered routine. Now I'm 11 years older and about 42lbs heavier P_Roloff 1 Quote Link to comment Share on other sites More sharing options...
Daggerty Posted April 24, 2018 Report Share Posted April 24, 2018 I have a pt test for my part time gig and I have a little different test first 40 push-ups in 2 minutes then 50 sit-ups in 2 minutes finally 2 miles in 16min 30sec. They do change it for age group and also for females "due to sociological differences." last year I ran it in a little over 13 min, I was 21 so idk if it counts. B C 1 Quote Link to comment Share on other sites More sharing options...
Bassboy3313 Posted April 24, 2018 Report Share Posted April 24, 2018 21 hours ago, suspenceful said: If you want me to print this, I could do it (without the light blue). It'd also be the most layered vinyl printed shirt I've ever done. Price from me would be $25 shipped on a heather gray Gildan tee. That doesn't include a cut to Mr Bassboy. I'm happy to make it happen if you guys (and Bassboy) are down! PM sent Quote Link to comment Share on other sites More sharing options...
Daggerty Posted April 25, 2018 Report Share Posted April 25, 2018 Anybody know the hook up on nitrous refills in the greater mke area? LMT does it but $7.50 a lb Quote Link to comment Share on other sites More sharing options...
wasnt m3 Posted April 26, 2018 Report Share Posted April 26, 2018 3 hours ago, Daggerty said: Anybody know the hook up on nitrous refills in the greater mke area? LMT does it but $7.50 a lb Check with Endless Performance Quote Link to comment Share on other sites More sharing options...
Daggerty Posted April 26, 2018 Report Share Posted April 26, 2018 2 hours ago, wasnt m3 said: Check with Endless Performance Never heard of them I'll give them a ring tomorrow. Thanks Quote Link to comment Share on other sites More sharing options...
HipMF Posted April 27, 2018 Report Share Posted April 27, 2018 FYI: SpeedyMetals (despite their amazing jingle) has completely lost their minds. Was going to order some stuff, but I can literally buy it at fleet farm/home depot/etc for the same price (or less?! o_O) . Very disappointed... m42b32 1 Quote Link to comment Share on other sites More sharing options...
REKIII Posted April 27, 2018 Report Share Posted April 27, 2018 With the new tariffs, steel price has gotten dumb. Jeff 1 Quote Link to comment Share on other sites More sharing options...
Jeff Posted April 27, 2018 Report Share Posted April 27, 2018 With the new tariffs, steel price has gotten dumb.Indeed it has..... Quote Link to comment Share on other sites More sharing options...
B C Posted April 27, 2018 Author Report Share Posted April 27, 2018 speedy metals has always had bad prices on plate and sheet. If you are setup as a customer with Speedy you get a 50% discount off their online price. The worst part of the tariff for me is that last year I started on a really nice excel spreadsheet of structural steel properties, sizes, prices, availability etc mostly as a quick reference for economical engineering. Sometimes you find that going from a 3/8" thick angle iron to a 1/2" thick makes a substantial negative impact on price and availability, when going to the next larger size of 3/8" thick angle iron gets you the strength you need for much less jingle. anyways I need to go through all the prices again at once so I can have a single snapshot of relative prices to reference. I knew this was going to happen since I didnt enter all the prices at once, but now they probably wont even be close. Quote Link to comment Share on other sites More sharing options...
Daggerty Posted May 1, 2018 Report Share Posted May 1, 2018 Someone broke into my storage unit and made off with some wheels. 3 of these that are black 2 of these 4 of these that are 17s 5 of these 2 of these with Hoosier slicks on them 4 of these just throwing this out there in case someone sees something Ryan... and P_Roloff 2 Quote Link to comment Share on other sites More sharing options...
Earl Posted May 1, 2018 Report Share Posted May 1, 2018 Holy hell. They cleaned out you. Haven't noticed any suspicious vehicles? Quote Link to comment Share on other sites More sharing options...
P_Roloff Posted May 1, 2018 Report Share Posted May 1, 2018 Damn man, that sucks. I’ll keep an eye out. Quote Link to comment Share on other sites More sharing options...
Ryan... Posted May 1, 2018 Report Share Posted May 1, 2018 Quote Link to comment Share on other sites More sharing options...
wasnt m3 Posted May 1, 2018 Report Share Posted May 1, 2018 That really blows. Check with the local scrap yards. Odds are some junkie scrapped them. m42b32 1 Quote Link to comment Share on other sites More sharing options...
m42b32 Posted May 1, 2018 Report Share Posted May 1, 2018 Man that sucks big time... Quote Link to comment Share on other sites More sharing options...
Rekpoint Posted May 1, 2018 Report Share Posted May 1, 2018 Damn that makes two of us in a year 😕 Quote Link to comment Share on other sites More sharing options...
Daggerty Posted May 2, 2018 Report Share Posted May 2, 2018 On 5/1/2018 at 11:42 AM, wasnt m3 said: That really blows. Check with the local scrap yards. Odds are some junkie scrapped them. That's what happened because they moved tools and stuff out of the storage unit but just took rims. The set with the drags was the only thing worth much. I went to the junkyards but I think they would rather turn a blind eye then loose out on money and deal with the police. thanks everyone for your condolences Quote Link to comment Share on other sites More sharing options...
suspenceful Posted May 2, 2018 Report Share Posted May 2, 2018 On 4/20/2018 at 11:25 AM, Bassboy3313 said: This is a reality now: https://www.wibimmers.com/board/index.php?/topic/5282-its-hard-to-be-humble-bmw-t-shirt-and-others/ Quote Link to comment Share on other sites More sharing options...
Jdesign Posted May 3, 2018 Report Share Posted May 3, 2018 22 hours ago, Daggerty said: That's what happened because they moved tools and stuff out of the storage unit but just took rims. The set with the drags was the only thing worth much. I went to the junkyards but I think they would rather turn a blind eye then loose out on money and deal with the police. thanks everyone for your condolences Holy shit man that blows!!! I would just keep an eye out for those Drags. Those wheels arent very common and I doubt who ever took them has a use for them. PEOPLE SUCK. Daggerty 1 Quote Link to comment Share on other sites More sharing options...
B C Posted May 7, 2018 Author Report Share Posted May 7, 2018 Be advised http://www.wisn.com/article/heads-up-state-patrol-to-use-planes-to-catch-interstate-speeders/20266238 Quote Link to comment Share on other sites More sharing options...
KaiserRolls Posted May 7, 2018 Report Share Posted May 7, 2018 1 hour ago, snap said: Be advised http://www.wisn.com/article/heads-up-state-patrol-to-use-planes-to-catch-interstate-speeders/20266238 Sounds like an awesome use of resources m42b32 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.